Power over Ethernet

4-Port USB over IP

Wed, 15 Apr 2009 12:36:36 GMT

Access & Monitor up to 4 USB devices over TCP/IP networks...

Serial Device Server-Dual Port

Wed, 15 Apr 2009 12:36:36 GMT

Easily setup/control remote serial port over internet...

4-port Redundant Power Unit

Wed, 15 Apr 2009 12:36:36 GMT

The SMCRPUPOE is a 4 port redundant power unit, easy to install and can supply 200W of Primary power and up to 360W for PoE devices in the event of AC loss or failure of the internal power supply of the 1st attached device to fail. It ships with four DC Backup Power Cords included (IEC connectors). Thermal overload protection prevents the RPU from overheating if a thermal overload occurs...

EZ Connect Powerline-Ethernet

Wed, 15 Apr 2009 12:36:36 GMT

EZ Connect 14Mbps Powerline to Ethernet Desktop Adapter....

24-Port 30W PoE Midspan

Wed, 15 Apr 2009 12:36:36 GMT

High Power (30W) 24-Port PoE Midspan, Gigabit, AC Input, Full Power....

12-Port 30W PoE Midspan

Wed, 15 Apr 2009 12:36:36 GMT

High Power (30W) 12-Port PoE Midspan, Gigabit, AC Input, Full Power....

6-Port 30W PoE Midspan

Wed, 15 Apr 2009 12:36:36 GMT

High Power (30W) 6-Port PoE Midspan, Gigabit, AC Input, Full Power....

24V 2-Pair High Power PoE Spli

Wed, 15 Apr 2009 12:36:36 GMT

2-Pair High Power PoE Active Splitter, 24 Volt output, use with PD-7000 Series...

18V 2-Pair High Power PoE Spli

Wed, 15 Apr 2009 12:36:36 GMT

2-Pair High Power PoE Active Splitter, 18 Volt output, use with PD-7000 Series...

12V 2-Pair High Power PoE Spli

Wed, 15 Apr 2009 12:36:36 GMT

2-Pair High Power PoE Active Splitter, 12 Volt output, use with PD-7000 Series...

24-Port PoE Midspan, 10/100/10

Wed, 15 Apr 2009 12:36:36 GMT

High Power (30W) 24 Port PoE Midspan, 10/100/1000 BaseT, AC Input, Full Power with NMS (SNMP) Management...

12-Port PoE Midspan, 10/100/10

Wed, 15 Apr 2009 12:36:36 GMT

High Power (30W) 12 Port PoE Midspan, 10/100/1000 BaseT, AC Input, Full Power with NMS (SNMP) Management...

6-Port PoE Midspan, 10/100/10

Wed, 15 Apr 2009 12:36:36 GMT

High Power (30W) 6 Port PoE Midspan, 10/100/1000 BaseT, AC Input, Full Power with NMS (SNMP) Management...

5V Active Splitter

Wed, 15 Apr 2009 12:36:36 GMT

802.3af active splitter, 5V output, DC jack round 3.4 x 1.35mm...

12V Active Splitter

Wed, 15 Apr 2009 12:36:36 GMT

802.3af active splitter, 12V output, DC jack round 3.4 x 1.35mm...

1 Port High Power PoE Injector

Wed, 15 Apr 2009 12:36:36 GMT

PowerDsine 1 Port High Power PoE Injector; provides 10/100/1000 connections; Cisco Technology Development Partner; IEEE 802.3af - legacy and Cisco propriety support....

Active Splitter

Wed, 15 Apr 2009 12:36:36 GMT

High-PoE Active Splitter, 12V output, DC jack round 5.5x2.5mm or 5.5x3.3x1mm...

12 port High Power Midspan

Wed, 15 Apr 2009 12:36:36 GMT

12-Port High Power Midspan, AC Input, w/Management...

Managed & Secure PoE Midspans

Wed, 15 Apr 2009 12:36:36 GMT

24-Port PoE Midspan, 200W total power...

12 Port PoE Midspan

Wed, 15 Apr 2009 12:36:36 GMT

12 Port PoE Midspan, AC Input w/Management, 6500 Series...

6 Port PoE Midspan

Wed, 15 Apr 2009 12:36:36 GMT

6 Port PoE Midspan, AC Input w/Management, 6500 Series...

24-Port PoE Midspan, 10/100/10

Wed, 15 Apr 2009 12:36:36 GMT

24-Port PoE Midspan, 10/100/1000BaseT...

12 port power over eth hub

Wed, 15 Apr 2009 12:36:36 GMT

12 port power over ethernet hub/ AC input w/management and gigabit compatibility...

1 port PoE injector, 10/100/10

Wed, 15 Apr 2009 12:36:36 GMT

PowerDsine 1 port High Power PoE injector; provides 10/100/1000 connections; Cisco Technology Development Partner; IEEE 802.3af - legacy and Cisco propriety support....

PoE IP Dome Camera

Wed, 15 Apr 2009 12:36:36 GMT

The LevelOne FCS-3021 is an indoor PoE IP Network Camera. It streams real-time audio and video in MPEG4 and MJPEG video compression formats over a PoE enabled LAN network or in 3GPP compression format for streaming over a 3G mobile network. PoE IP Camera The FCS-3021 features an IEEE 802.3af Power over Ethernet compliant PoE module for flexible deployment over a PoE enabled LAN network. Users can install the camera without concern for a power outlet located near the camera. A PoE network switch or midspan hub provides data communications and power to the camera over a single Cat.5e/6 cable....

4-port PoE SC Fiber Switch

Wed, 15 Apr 2009 12:36:36 GMT

4-Port PoE w/1-Port SC Fiber Switch-Multi mode...

PoE Midspan or Switch Detector

Wed, 15 Apr 2009 12:36:36 GMT

PowerDsine PoE tester allows one to test the live Ethernet cable and determine if power and data are present. Cisco Technology Development Partner; IEEE 802.3af - legacy and Cisco propriety detection....

6 port High Power PoE injector

Wed, 15 Apr 2009 12:36:36 GMT

PowerDsine 6 port High Power PoE injector; Cisco certified, provides up to 39 watts of power; SNMP v3 management; limited lifetime warranty; Cisco Technology Development Partner; backward compatible IEEE 802.3af - legacy and Cisco propriety support....

1 port High Power PoE injector

Wed, 15 Apr 2009 12:36:36 GMT

PowerDsine 1 port High Power PoE injector; Cisco certified, provides up to 32 watts of power; Cisco Technology Development Partner; backward compatible to IEEE 802.3af - legacy and Cisco propriety support....

48 port 10/100 PoE injec

Wed, 15 Apr 2009 12:36:36 GMT

PowerDsine 48 port PoE injector; SNMP v3 management;Cisco certified Internet Telephony Product of the Year; limited lifetime warranty; Cisco Technology Development Partner; IEEE 802.3af - legacy and Cisco propriety support....

24 port 10/100 PoE injector,

Wed, 15 Apr 2009 12:36:36 GMT

PowerDsine 24 port PoE injector; SNMP v3 management; full power - 400 watt power supply; limited lifetime warranty; Cisco Technology Development Partner; IEEE 802.3af - legacy and Cisco propriety support....

6 port GIGABIT 10/100/1000 PoE

Wed, 15 Apr 2009 12:36:36 GMT

PowerDsine 6 port GIGABIT PoE injector; SNMP v3 management; Cisco certified, limited lifetime warranty; Cisco Technology Development Partner; IEEE 802.3af - legacy and Cisco propriety support....

24 port 10/100 PoE injector

Wed, 15 Apr 2009 12:36:36 GMT

PowerDsine 24 port PoE injector; Cisco certified, 19 inch rackmount;Cisco Technology Development Partner; IEEE 802.3af - legacy and Cisco propriety support....

12 port 10/100 PoE injector

Wed, 15 Apr 2009 12:36:36 GMT

PowerDsine 12 port PoE injector; Cisco certified, full power - 200 watt power supply; 19 inch rack mount; Cisco Technology Development Partner; IEEE 802.3af - legacy and Cisco propriety support....

POE Splitter

Wed, 15 Apr 2009 12:36:36 GMT

LevelOne s POS-1000 is a POE splitter to integrate Power Over Ethernet (POE) technology to legacy appliance by just using a single Cat.5 Ethernet cable for both power and data transaction. The legacy equipments such as Wireless AP, NetworkCamera, Printer server, Converter and Projector Server, which connect to POS-1000, all devices become POE enabled to eliminate the need of power outlets as well as cable installation and expense. To avoid over-voltage damage, the splitter is equipped withvoltage DIP that allows user to switch in 5- or 12-voltage for different appliance power specification. For easier, cost-effective POE network installation, the POS-1000 is your best solution to protect original investment....

POE Injector

Wed, 15 Apr 2009 12:36:36 GMT

LevelOne s POI-2000 is a passive POE device with internal power to minimize bulky power line and AC outlet management while installing your network. The product is fully compliant with the IEEE 802.3af standard and integrates with the original network to deliver power and data to a remote POE device over nothing more than an existing standard Ethernet cable....

8-port MidSpan POE HUB

Wed, 15 Apr 2009 12:36:36 GMT

LevelOne s 19 Mid-Span POE hub is equipped with 8 RJ-45 ports featuring POE function to eliminate the bulky power cable need while implementing your network infrastructure thus allowing greater flexibility in the locating of network devices and significantly decreasing installation costs....

Power over Ethernet Splitter

Wed, 15 Apr 2009 12:36:36 GMT

TRENDnet s TPE-102S Power over Ethernet Splitter provides an innovative and cost effective solution to a variety of Ethernet devices such as VoIP phones or Wireless Access Points. Reduce costs by using existing CAT5 cable to deliver both power and data where power source is difficult to obtain...

Power over Ethernet Injector

Wed, 15 Apr 2009 12:36:36 GMT

TRENDnet s TPE-101I Power over Ethernet Injector provides an innovative and cost effective solution to a variety of Ethernet devices such as VoIP phones or Wireless Access Points. Reduce costs by using existing CAT5 cable to deliver both power and data where power source is difficult to obtain....

Point Sys 100BTX-100BFX MM SC

Wed, 15 Apr 2009 12:36:36 GMT

Fast Ethernet Point System Cvtr MM SC 2km, PoE...

4-port Redundant Power Unit

Wed, 15 Apr 2009 12:36:36 GMT

MODEL- SMCRPU14 VENDOR- SMC NETWORKS

FEATURES- Redundant Power Supply
This Redundant Power Unit (SMCRPU14) can supply 600 Watts of
backup power to four switches in the event of an AC loss or
failure of an internal power supply. It ships with four DC Backup
Power Cords included (IEC connectors). Thermal overload
protection prevents the RPU from overheating if a thermal overload
occurs. Over-voltage protection shuts down an output channel if
the voltage exceeds a preset threshold whereas over-current
protection shuts down the RPU if the output load exceeds a preset
threshold. Short-circuit protection prevents the RPU from being
damaged from a short circuit on any output channel. Four status
indicators for Link, Activity, Fan, Thermal, and Power are located
on the RPUs front panel. While the AC supply and DC backup sockets
are located on the RPUs rear panel. The SMCRPU14 can be mounted in
a standard 19-inch equipment rack(brackets included) or on a flat
surface....

POE 5 Volt Splitter

Wed, 15 Apr 2009 12:36:36 GMT

MODEL- POES5 VENDOR- LINKSYS

FEATURES- 5 Volt Power Over Ethernet Splitter
Convert your Linksys IP Phone to use Power over Ethernet!
The Linksys 5 Volt Power Over Ethernet (POES5) Splitter lets you put
your Linksys IP Phones almost anywhere, by removing the requirement
of nearby power outlets. The POES5 sends power and VoIP over one
Category 5 cable to your Linksys IP Phone. When it's time to add or
relocate a phone, the POES5 can simplify your installation.
The POES5 provides an 802.3af PoE port for connection back to a PoE
switch. The compact POES5 connects to the standard DC power input
and RJ45 Ethernet port on the Linksys IP Phone (or other supported
Linksys VoIP product) via two "split" cables. The POES5 can be then
tucked away and concealed in the stand attached to the Linksys IP
phone.
Simplify your installation and place your Linksys IP Phones, or any
of the other supported Linksys VoIP products in a preferred spot
with the Linksys 5 Volt Power Over Ethernet (POES5) Splitter.
Includes 5 Volt Power over Ethernet Splitter and Quick installation
guide.
* Simplifies your Linksys IP Phone installation by combining power and VoIP
onto one cable.
* Can also be use with many Linksys VoIP Products
* Works with a Standard Category 5 Ethernet Cable
* Easy to install, no tools, no software
* Designed to fit into the Linksys IP Phone stand (or optional mounting
bracket-MB100).
* Operates with the SPA901, SPA921, and SPA941 IP Phones
* Operates with the SPA3000, SPA9000 and PAP2T
* Also operates with the SPA1001, SPA2000, SPA2002, SPA2100, SPA2102,
SPA3102.

-- SPECIFICATIONs -----------------------------------
STANDARDs - IEEE 802.3 10BaseT, 802.3u 100BaseTX, 802.3af
CONNECTORs - (1) 10B...

19" Mounting Bracket

Wed, 15 Apr 2009 12:36:36 GMT

MODEL- PD-3000/MBK VENDOR- POWERDSINE

FEATURES- 19" Mounting Bracket kit
For use with PD3006
...

PoE 1-Port Midspan

Wed, 15 Apr 2009 12:36:36 GMT

MODEL- PD-3001/AC VENDOR- POWERDSINE

FEATURES- 1-port Power over Ethernet Midspan
PowerDsines 3001 Power over Ethernet (PoE) 3001 single port Midspan
offers a compact and cost effective, fully IEEE 802.3af compliant
solution for remote powering of wireless LAN (WLAN) access points,
and other low port density installations.
The 3001 PoE Midspan eliminates the need for external power supply
and its associated AC/DC power cabling, providing a compact,
affordable, safe and reliable power solution over existing
Ethernet infrastructure.
* Compact Design
PowerDsines 3001 is a small and compact standalone product. No
additional components are needed. Just add an IEC320 standard line cord.
* Standard Compliance
PowerDsines 3001 PoE midspan is fully compatible with IEEE 802.3af
standard. It features a standard auto-sensing algorithm and provides
safe power to remote terminals.
* Upgrade Legacy Ethernet Switches
The PowerDsine 3001 Power over Ethernet (PoE) midspan connects to legacy
Ethernet infrastructure, enables users to upgrade their existing
Ethernet switches and provide power over Ethernet capabilities. The
PowerDsine 3001 generates safe power over standard Category 5 cabling.
By sending 48V, Ethernet terminals such as wireless LAN access points,
IP Phones and network cameras are powered remotely. An external splitter
may be installed where a device is not standard compliant.
* Scalable Design
PowerDsines 3001 has an exclusive interlocking feature which connects
multiple units together side by side to support more than one wireless
LAN access point. It is especially designed for small business and low-
port density installations.
* Centralized Power Distribution
Deploying a PoE midspan in conjunction with a central UPS provides...

Power over ethernet hub

Wed, 15 Apr 2009 12:36:36 GMT

12 port power over ethernet hub...

Power over ethernet hub

Wed, 15 Apr 2009 12:36:36 GMT

6 port power over ethernet hub...

Splitter Nokia & Panasonic

Wed, 15 Apr 2009 12:36:36 GMT

Splitter for use with Axis and Nokia and Panasonic products...