Media Converters- Standalone

101001000 Standalone Cvtr

Wed, 15 Apr 2009 12:36:34 GMT

10/100/1000BASE-T to 1000BASE-SX/LX 10/100/1000 media converter that converts the electrical signal of a 10/100/1000 Ethernet signal from copper to fiber. This solution will offer a low-cost integration option for network managers who want to migrate from 10/100 networks to Gigabit Ethernet. Gigabit only switches can now be connected to 10/100 networks without the need to upgrade the 10/100 side, allowing network managers to add new equipment gradually....

101001000 Enet StandAlone

Wed, 15 Apr 2009 12:36:34 GMT

10/100/1000 Ethernet Stand-Alone Media Converters 10/100/1000BASE-T (RJ-45) [100 m/328 ft.] to 1000BASE-SX 850nm multimode (SC) [62.5/125 m: 220 m/722 ft.; 50/125 m: 550 m/1804 ft.]...

Media Cnvtr 100BTX100FX SM SC

Wed, 15 Apr 2009 12:36:34 GMT

Fast Ethernet Just Convert-IT Stand-Alone Media Converters 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1310nm single mode (SC) [20 km/12.4 miles]...

Media Cnvtr 100BTX100FX MM SC

Wed, 15 Apr 2009 12:36:34 GMT

Fast Ethernet Just Convert-IT Stand-Alone Media Converters 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm multimode (SC) [2 km/1.2 miles]...

Media Cnvtr 100BTX100FX MM ST

Wed, 15 Apr 2009 12:36:34 GMT

Fast Ethernet Just Convert-IT Stand-Alone Media Converters 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm multimode (ST) [2 km/1.2 miles]...

MC 10BT10BFX SM ST

Wed, 15 Apr 2009 12:36:34 GMT

Transition Just Convert-It Standalone Media Converter, 10BASE-T (RJ-45) [100 m/328 ft.] 10BASE-FL 1310nm single mode (SC) [20 km/12.4 miles]...

MC 100BTX100BFX SM SC

Wed, 15 Apr 2009 12:36:34 GMT

Transition Mini Media Converters, 10/100BaseTX to 100BaseFX Single Mode Fiber SC (131nm)...

MC 10BT10BFL SM ST

Wed, 15 Apr 2009 12:36:34 GMT

Transition Ethernet Stand-Alone Media Converters 10BASE5 (AUI (DB-15)) [50 m/164 ft.] 10BASE-FL 1310nm single mode (ST) [20 km/12.4 miles]...

MC 10B210BT Stand Alone

Wed, 15 Apr 2009 12:36:34 GMT

Transition Just Convert-It Standalone Media Converter, 10Base2 (BNC) to 10BaseT (RJ45)....

GB Standalone Media Cvtr

Wed, 15 Apr 2009 12:36:34 GMT

Migrate to Gigabit Ethernet in a cost-effective manner. Used in conjunction with lower cost 1000BASE-T switches, companies can take advantage of the high bandwidth Gigabit Ethernet offers without all of the higher costs. Transition Networks s 1000BASE-T to SX/LX converters allow users to extend the bandwidth to those users outside the reach of the 1000BASE-T standard (up to 125 km)....

GB Standalone Media Cvtr

Wed, 15 Apr 2009 12:36:34 GMT

Transition networks SFMFF1314-220 multimode to single mode converter - 1 x sc 1000base-sx 1 x sc 1000base-lx - - media converter --Used individually or in pairs, this media converter can extend Gigabit Ethernet over single mode fiber up to 125 km. Convert 1000BASE-SX ports on a Gigabit Ethernet switch to 1000BASE-LX on a port-by-port basis. Ideal for campus area networks or other applications requiring the distance advantages of single mode fiber....

POTS 2wire FXO Standalone Med

Wed, 15 Apr 2009 12:36:34 GMT

TRANSITION NETWORKS SAPTF3314-110-NA POTS 2-WIRE FXO RJ-11 TO 1310NM SMF SC 20KM CONVERTER system is intended to connect central-office voice grade signals to distant Plain old telephone equipment (POTS) utilizing standard telephone signaling. Two units are required to implement an end to end system. Unit A connects to a telephone line or PBX and has the ability to detect ringing voltages and to act as a telephone (LINE SIDE FXS). Unit B is the reciprocal unit and has the ability to act as a Central Office and connects to a telephone device (CUSTOMER SIDE FXO)....

10100Mbps TX to 100B FX Convr

Wed, 15 Apr 2009 12:36:34 GMT

TFC-110S20D3 or TFC-110S20D5 Bi-Directional Single Strand Fiber Media Converter transforms 10/100Base-TX UTP/STP media to 100Base-FX media and vice versa. The 10/100Base-TX Port Auto-negotiates between 10 and 100Mbps connection speed and supports Auto-MDIX. The 100Base-FX port supports single-mode SC type connection. These converters provide the ability to fiber optically connect networks together over distances of up to 20km....

1000Mbps TX to 1000BaseFX Sin

Wed, 15 Apr 2009 12:36:34 GMT

TFC-1000S40D5 Bi-Directional Single-Fiber Media Converter transforms 1000Base-TX UTP/STP media to 1000Base-FX media and vice versa. It provides DIP switch for duplex mode, auto negotiation or speed management control. This converter will give your Switch/Hub the ability to interface with fiber connection over a distance up to 40 km....

1000Mbps TX to 1000BaseFX Sin

Wed, 15 Apr 2009 12:36:34 GMT

TFC-1000S40D3 Bi-Directional Single-Fiber Media Converter transforms 1000Base-TX UTP/STP media to 1000Base-FX media and vice versa. It provides DIP switch for duplex mode, auto negotiation or speed management control. This converter will give your Switch/Hub the ability to interface with fiber connection over a distance up to 40 km....

10100BaseTX to 100BaseFX SF

Wed, 15 Apr 2009 12:36:34 GMT

TRENDnet TFC-2000S20 One 1000Base-T Auto-MDIX RJ-45 port to One 1000Base-LX single-mode SC-type Fiber port Fiber Converter, Compliant with IEEE 802.3ab 1000Base-T, 802.3z 1000Base-LX, Supports Link Loss Carry Forward, Provides Dip switches to enable LLCF function in both TX and Fiber port, Diagnostic LEDs, Plug & Play, Hot Swappable, Optional 19 Fiber Converter Chassis (TFC-1000) holds up to 10 Fiber Converters....

10100BaseTX to 100BaseFX SF

Wed, 15 Apr 2009 12:36:34 GMT

10/100Mbps-TX to 100Base-FX SC-Type Single-Mode Fiber Converter - TFC-210S30 - This Fiber Converter with SC-Type connector transforms 10/100Base-TX UTP/STP media to 100Base-FX single mode media. The 10/100Base-TX port supports auto-negotiation and auto-MDIX. Designed to connect up to 30km, the converters are the perfect Fast Ethernet, single-mode solution....

10100BaseTX to WDM TX1550 S

Wed, 15 Apr 2009 12:36:34 GMT

10/100Mbps-TX to 100Base-FX Dual-Wavelength Single-Mode Fiber Converter - The TFC-210S20D5 Bi-Directional Single-Fiber Media Converter transforms 10/100Mbps-TX UTP/STP media to 100Base-FX media and vice versa. The 10/100Mbps-TX Port Auto-Negotiating 10 or 100Mbps connection speed with Auto-MDIX media type, the fiber supports single-mode SC type connection. This converter will give your Switch/Hub the ability to interface with fiber connection over a distance up to 20 km....

10100BaseTX to WDM TX1310 S

Wed, 15 Apr 2009 12:36:34 GMT

10/100Mbps-TX to 100Base-FX Dual-Wavelength Single-Mode Fiber Converter - TFC-210S20D3 Bi-Directional Single-Fiber Media Converter transforms 10/100Mbps-TX UTP/STP media to 100Base-FX media and vice versa. The 10/100Mbps-TX Port Auto-Negotiating 10 or 100Mbps connection speed with Auto-MDIX media type, the fiber supports single-mode SC type connection. This converter will give your Switch/Hub the ability to interface with fiber connection over a distance up to 20 km....

10100BaseTX to 100BaseFX ST

Wed, 15 Apr 2009 12:36:34 GMT

This Fiber Converter transforms 10/100Base-TX UTP/STP media to 100Base-FX multi-mode media. The 10/100Base-TX port supports auto-negotiation and auto-MDIX. Designed to connect up to 2KM, the converters are the perfect Fast Ethernet, multi-mode solution....

10100BaseTX to 100BaseFX SC

Wed, 15 Apr 2009 12:36:34 GMT

1000BaseT to 1000BaseSX SCT

Wed, 15 Apr 2009 12:36:34 GMT

1000Base-TX to 1000Base-SX SC-Type Multi-Mode Fiber Converter - TFC-2000MSC - This Fiber Converter transforms 1000Base-T UTP/STP media to 1000Base-SX multi-mode. The 1000Base-T port supports auto-MDIX. Designed to connect up to 550M, the converters are the perfect Gigabit, multi-mode solution....

100BaseFX Multi Mode to Singl

Wed, 15 Apr 2009 12:36:34 GMT

100Base-FX Multi Mode to Single Mode Fiber Converter (15KM). TRENDnet's TFC-100 series Fiber Media Converter transforms 100Base-TX UTP/STP media to 100Base-FX media and vice versa. The 100Base-TX port auto-negotiates half-/full-duplex connection and it has a slide-switch for selecting MDI-X / MDI-II media type. This converter will give your Switch/Hub the ability to interface with fiber connections over a distance up to 75 km. With the optional 16-slot EIA-19" rack-mount chassis...

Intelligent 10100BaseTX to 1

Wed, 15 Apr 2009 12:36:34 GMT

Intelligent 10/100Base-TX to 100Base-FX Single Mode Fiber Converter(60KM). TFC-110Sxxi series Fiber Converter transforms 10/100Base-TX UTP/STP media to 100Base-FX media and vice versa. The 10/100Base-TX port auto-sense 10 or 100Mbps connection speeds, auto-negotiates half-/full-duplex mode, and auto-MDIX media type. This converter gives your switch the ability to interface with fiber connection over a distance up to 60 Km....

10100BaseTX to 100BaseFX Si

Wed, 15 Apr 2009 12:36:34 GMT

10/100Base-TX to 100Base-FX Single-Mode Fiber Converter (60Km) with SC-Type Connector - TRENDnet's TFC-110 series Fiber Media Converter transforms 10/100Base-TX UTP/STP media to 100Base-FX media and vice versa. The 10/100Base-TX port auto-sense 10 or 100Mbps connection speed, auto-negotiates half-/full-duplex mode, and auto-selects MDI-X / MDI-II media type. The fiber connection can be multi-mode SC, MT-RJ, or single-mode SC Connector and it has a slide-switch for selecting half- or full-duplex mode. This converter will give your Switch/Hub the ability to interface with fiber connection over a distance up to 60 km...

Intelligent 10100BaseTX to 1

Wed, 15 Apr 2009 12:36:34 GMT

Intelligent 10/100Base-TX to 100Base-FX Single Mode Fiber Converter(30KM). TFC-110Sxxi series Fiber Converter transforms 10/100Base-TX UTP/STP media to 100Base-FX media and vice versa. The 10/100Base-TX port auto-sense 10 or 100Mbps connection speeds, auto-negotiates half-/full-duplex mode, and auto-MDIX media type. This converter gives your switch the ability to interface with fiber connection over a distance up to 30 Km....

10100BaseTX to 100BaseFX Si

Wed, 15 Apr 2009 12:36:34 GMT

TRENDnet's TFC-110 series Fiber Media Converter transforms 10/100Base-TX UTP/STP media to 100Base-FX media and vice versa. The 10/100Base-TX port auto-sense 10 or 100Mbps connection speed, auto-negotiates half-/full-duplex mode, and auto-selects MDI-X / MDI-II media type. The fiber connection can be multi-mode SC, MT-RJ, or single-mode SC Connector and it has a slide-switch for selecting half- or full-duplex mode. This converter will give your Switch/Hub the ability to interface with fiber connection over a distance up to 30 km....

Intelligent 10100BaseTX to 1

Wed, 15 Apr 2009 12:36:34 GMT

Intelligent 10/100Base-TX to 100Base-FX Single Mode Fiber Converter(15KM). TFC-110Sxxi series Fiber Converter transforms 10/100Base-TX UTP/STP media to 100Base-FX media and vice versa. The 10/100Base-TX port auto-sense 10 or 100Mbps connection speeds, auto-negotiates half-/full-duplex mode, and auto-MDIX media type. This converter gives your switch the ability to interface with fiber connection over a distance up to 15 Km....

10100BaseTX to 100BaseFX Si

Wed, 15 Apr 2009 12:36:34 GMT

10/100Base-TX to 100Base-FX Single-Mode Fiber Converter (100Km) with SC-Type Connector -TRENDnet's TFC-110 series Fiber Media Converter transforms 10/100Base-TX UTP/STP media to 100Base-FX media and vice versa. The 10/100Base-TX port auto-sense 10 or 100Mbps connection speed, auto-negotiates half-/full-duplex mode, and auto-selects MDI-X / MDI-II media type. The fiber connection can be multi-mode SC, MT-RJ, or single-mode SC Connector and it has a slide-switch for selecting half- or full-duplex mode. This converter will give your Switch/Hub the ability to interface with fiber connection over a distance up to 100 km....

10100 to 100BaseFX STtype F

Wed, 15 Apr 2009 12:36:34 GMT

TRENDnet s TFC-110MSTE Fiber Media Converter transforms 10/100Base-TX UTP/STP media to 100Base-FX media and vice versa. The 10/100Base-TX Port Auto-Negotiating 10 or 100Mbps connection speed with Auto-MDIX media type. The fiber connection can be multi-mode of ST type. This converter will give your Switch/Hub the ability to interface with fiber connection over a distance up to 2 km....

1000BaseT to SFP Converter

Wed, 15 Apr 2009 12:36:34 GMT

1000Base-T to Mini GBIC Media Converter. TRENDnet s TFC-1000 series Fiber Media Converter transforms 1000Base-T (Copper Gigabit) media to 1000Base-SX/LX (Mini-GBIC) media and vice versa. The 1000Base-T port supports full-duplex Gigabit connection at wire speed with RJ45 connector. The Mini-GBIC connection supports shortwave (SX) or longwave (LX) laser optic with multi-mode or single-mode Mini-GBIC module. This converter will give your Copper Gigabit connection the ability to interface with fiber connection over a great distance...

HDMI to DVID with SPDIF Audio

Wed, 15 Apr 2009 12:36:34 GMT

Converge A/V by StarTech.com helps make video conversion and signal management a breeze. HDMI2DVI allows you to seperate the digital audio and video from HDMI to DVI-D and SPDIF audio interface....

Component Video and Toslink Au

Wed, 15 Apr 2009 12:36:34 GMT

"A perfect solution for consolidating standard or high definition A/V connections and digital audio into a single, convenient HDMI. connection, this Component and Toslink to HDMI converter allows you to connect the YCbCr/YPbPr output from a DVD player. or Set-Top box to an HDMI capable display, providing HDTV resolutions of up to 1080p."...

Single ModeMultimode Convert

Wed, 15 Apr 2009 12:36:34 GMT

Gigabit (1000 Mbps) Single Mode/Multi-mode Fiber to Fiber Converter (SC - 10 Km). Do you need to bridge multi-mode and single mode fiber optic networks? The ET91000MMSM is a cost-effective, transparent way to interconnect single mode and multi-mode fiber networks at Gigabit speeds at distances up to 10 Km....

10100 RJ45 to SC MM Converter

Wed, 15 Apr 2009 12:36:34 GMT

"StarTech.com s high-speed MCM1110GSC gigabit media converter is engineered to make fiber connections simple, reliable and cost-effective. StarTech.com s MCM1110GSC is the perfect solution for connecting buildings to main networks. Easy to set up and install in a matter of seconds. This reliable and compact fiber optic media converter features a heavy-duty power supply to withstand the most challenging environments. It has 6 LED indicators to ensure its continuous operation. Supporting a maximum multimode fiber optic cable distance of 550m. Gigabit speeds prevent bottlenecks and keeps your data flowing quickly and smoothly. Complies with the IEEE 802.3 and 802.3u standard."...

10100 RJ45 to ST MM Converter

Wed, 15 Apr 2009 12:36:34 GMT

"The perfect solution for converting between 10 Base-T or 100 Base-TX electrical Ethernet signals and 100 Base-FX optical Ethernet signals, this 10/100 RJ45 multi-mode Converter supports a maximum multi-mode fiber optic cable distance of 2km, ensuring a highly reliable signal for ideal network performance."...

10100 RJ45 to SC MM Converter

Wed, 15 Apr 2009 12:36:34 GMT

GB RJ45 to MMode LC Converter

Wed, 15 Apr 2009 12:36:34 GMT

"StarTech.com s high-speed ET91000LC gigabit media converters are engineered to make fiber connections simple and reliable for even the most demanding network specialists. StarTech.com s ET91000LC is the perfect solution for connecting buildings to main networks. Easy to set up and install in a matter of seconds. This reliable and compact fiber optic media converter features a heavy-duty power supply to withstand the most challenging environments. It has 6 LED indicators to ensure its continuous operation. While supporting a maximum multimode fiber optic cable distance of 550 meters, it allows full wire speed of 148,800 packets per second throughput that prevents bottlenecks and keeps your data flowing quickly and smoothly. Guaranteed compatibility with 3COM , Cisco , Lucent and Nortel networks and fully complies with the IEEE 802.3 and 802.3u standard."...

10/100Mbps TX to 100B-FX Convr

Wed, 15 Apr 2009 12:36:34 GMT

TFC-110S15 - 10/100Base-TX to 100Base-FX Single-Mode Fiber Converter w/ SC-Type Connector...

10/100B-TX to 100B-FX Fib.Cnvr

Wed, 15 Apr 2009 12:36:34 GMT

TRENDnet's TFC-110 series Fiber Media Converter transforms 10/100Base-TX UTP/STP media to 100Base-FX media and vice versa. The 10/100Base-TX port auto-sense 10 or 100Mbps connection speed, auto-negotiates half-/full-duplex mode, and auto-selects MDI-X / MDI-II media type. This converter will give your Switch/Hub the ability to interface with fiber connection over a distance up to 2 km. With the optional 16-slot EIA-19" rack-mount chassis; the TFC series converters are the perfect solutions for various fiber media conversions for your network...

OAM IP Managed Media Converter

Wed, 15 Apr 2009 12:36:34 GMT

10/100 RJ-45 to 100Base-FX 1310nm SM SC 20km...

OAM IP Managed Media Converter

Wed, 15 Apr 2009 12:36:34 GMT

10/100 RJ-45 to 100Base-FX 1300nm MM ST 2km...

10/100Mbps TX to 100B-FX Convr

Wed, 15 Apr 2009 12:36:34 GMT

USB 10/100 Ethernet Adapter

Wed, 15 Apr 2009 12:36:34 GMT

USB Specification Rev. 1.0 and 1.1 compliant IEEE 802.3 MII complaint Full-speed USB Device Supports USB suspend/resume detection logic, wakeup frame, link status change Supports up to 32KB external, 2KB internal SRAM System Requirements: IBM PC 486DX4-100 MHz or higher or compatible system; Available USB port; Win 98/ME/2000...

1000B-T to 1000B-LX Fiber Cnvr

Wed, 15 Apr 2009 12:36:34 GMT

1000Base-T to1000Base-LX Single-Mode Fiber Converter (20Km) with SC-Type Connector...

Comp Vid and Audio Cat5 Extend

Wed, 15 Apr 2009 12:36:34 GMT

The perfect solution for connecting composite video devices using standard Cat5 cable, this Composite Video and Audio Cat5 Extender lets you extend signals up to 200 meters, making it perfect not only for current configurations, but also ideal for any future reconfigurations.COMPUTPEXTA is comprised of two extender units that can be used interchangeably-one is installed near the video signal source, the other to be placed near the desired display, up to an impressive 200m away. With no software or power adapter required, installation and setup is quick and hassle-free....

USB to Serial Adapter

Wed, 15 Apr 2009 12:36:34 GMT

The USB Serial Adapter is a dongel with a USB A connector on one end, and a DB9M connector on the other. It provides an external plug-and-play RS-232 Male serial connection to your computer s USB A host port, or to an external USB hub s downstream port. The onboard, proprietary circuitry under the DB9 hood guarantees 100% compatability with all serial RS-232 devices. Installation is easy. Simply plug a serial device into the UC-232A adapter and plug the USB port into the computer. No IRQs are needed, so there are no IRQ or Com port conflicts...

USB Network Interface Module

Wed, 15 Apr 2009 12:36:34 GMT

NetCommander USB Network Interface Module...

10/100B-TX to 100B-FX MM Convr

Wed, 15 Apr 2009 12:36:34 GMT

TRENDnet's TFC-110 series Fiber Media Converter transforms 10/100Base-TX UTP/STP media to 100Base-FX media and vice versa....

10/100B-TX to 100B-FX MM Convr

Wed, 15 Apr 2009 12:36:34 GMT

TRENDnet's TFC-110 series Fiber Media Converter transforms 10/100Base-TX UTP/STP media to 100Base-FX media and vice versa....

1000B-T to 1000B-SX MM Convrt.

Wed, 15 Apr 2009 12:36:34 GMT

TRENDnet's TFC-1000 series Fiber Media Converter transforms 1000Base-T (Copper Gigabit) media to 1000Base-SX/LX (Fiber Gigabit) media and vice versa....

10/100 Ind.Substation Switch

Wed, 15 Apr 2009 12:36:34 GMT

Substation Industrial Switch 10/100BASE-TX to 100BASE-FX Transition Networks's Substation Industrial Switches are hardened devices designed to reliably operate in harsh substation environments or other hazardous environments (Class 1, Div. 2). The switches are IEEE1613 compliant and offer many, industry first features such as a Lifetime Warranty, Automatic Link Restoration, Far-End Fault, Pause and the widest selection of fiber optic ports and distances. A wide voltage input range accommodates both AC and DC voltage inputs and the extended operating temperature range of -40 C to +75 C with no fans, offers flexibility in the mounting environment with the utmost in reliability. For mission critical applications, a dual fiber port version is offered that can be used in a redundant fiber ring or multiple path configurations....

10/100 Ind. Substation Switch

Wed, 15 Apr 2009 12:36:34 GMT

10/100 Industr.Substation Swit

Wed, 15 Apr 2009 12:36:34 GMT

Transceiver 10B5-10BT RJ45

Wed, 15 Apr 2009 12:36:34 GMT

This Attachment Unit Interface (AUI) transceiver provides a method for connecting a workstation, or any other device with an AUI port, to twisted pair cabling in a 10BASE-T network. Devices with AUI ports could include: servers, hubs, bridges and routers. The E-TBT-MC04 transceiver allows twisted pair, UTP or STP, to be connected to these AUI ports....

Transceiver 10B5-10BFL MM ST

Wed, 15 Apr 2009 12:36:34 GMT

10Base-5 (AUI) to 10Base-FL MM ST 2km The Full/Half-Duplex 10BASE-FL Transceiver provides low cost network migration options....

MC 100BTX-100BFX MM ST

Wed, 15 Apr 2009 12:36:34 GMT

10/100 Bridging 10/100BASE-TX to 100BASE-FX The Mini Media Converters provide a costeffective method for integrating fiber optic cabling into a 10/100 UTP environment. With its miniature size, the Mini offers a space saving alternative while it converts copper to fiber with the smallest footprint available in the industry. Depending upon the unit, this plug-and-play media converter offers three methods for powering the unit. All Mini's can be powered with the included power adapter, while other options include powering through a USB port or though an 802.3af Power over Ethernet enabled RJ-45 port. Two power options can be used simultaneously, providing the security of redundant power supplies. The Mini is available with either ST or SC fiber interfaces and is available for either multimode or single mode fiber....

MC 100BTX-100BFX MM SC

Wed, 15 Apr 2009 12:36:34 GMT

The Mini Media Converters provide a costeffective method for integrating fiber optic cabling into a 10/100 UTP environment. With its miniature size, the Mini offers a space saving alternative while it converts copper to fiber with the smallest footprint available in the industry. Depending upon the unit, this plug-and-play media converter offers three methods for powering the unit. All Mini's can be powered with the included power adapter, while other options include powering through a USB port or though an 802.3af Power over Ethernet enabled RJ-45 port. Two power options can be used simultaneously, providing the security of redundant power supplies. The Mini is available with either ST or SC fiber interfaces and is available for either multimode or single mode fiber....

GB Standalone Media Cvtr

Wed, 15 Apr 2009 12:36:34 GMT

1000Base-LX 1310nm SM LC 40km

Wed, 15 Apr 2009 12:36:34 GMT

Fibre Ch 2x/1x/OC-48/STM-16 SFP...

1310nm SM SC 20km

Wed, 15 Apr 2009 12:36:34 GMT

100Base-FX / OC-3 SFP...

1310nm SM SC 20km

Wed, 15 Apr 2009 12:36:34 GMT

OC-12 / STM-4 SFP...

1300NM mm sc 2KM

Wed, 15 Apr 2009 12:36:34 GMT

100Base -FX/ OC-3 SFP...

1300nm MM SC 1km

Wed, 15 Apr 2009 12:36:34 GMT

OC-12 / STM-4 SFP...

1000Base-LX 1310nm SM LC 2km

Wed, 15 Apr 2009 12:36:34 GMT

Fibre Ch 2x/1x/OC-48/STM-16 SFP...

1000Base-SX 850nm MM LC

Wed, 15 Apr 2009 12:36:34 GMT

OC-48/STM-16/Fibre Ch 1x/2x SFP...

1000Base-LX 1310nm SM LC 15km

Wed, 15 Apr 2009 12:36:34 GMT

Fibre Ch 2x/1x/OC-48/STM-16 SFP...

10/100 POE Just Convert-IT Cvt

Wed, 15 Apr 2009 12:36:34 GMT

10/100BTX-100BFX 1310nm SM SC 20km...

10/100 POE Just Convert-IT Cvt

Wed, 15 Apr 2009 12:36:34 GMT

10/100BTX-100BFX 1300nm MM SC 2km...

10/100 POE Just Convert-IT Cvt

Wed, 15 Apr 2009 12:36:34 GMT

10/100BTX-100BFX 1300nm MM ST 2km...

10/100 POE Standalone Cvtr

Wed, 15 Apr 2009 12:36:34 GMT

10/100BTX-100BFX 1310nm SM SC 20km...

10/100 POE Standalone Cvtr

Wed, 15 Apr 2009 12:36:34 GMT

10/100BTX-100BFX 1300nm MM SC 2km...

10/100 POE Standalone Cvtr

Wed, 15 Apr 2009 12:36:34 GMT

10/100BTX-100BFX 1300nm MM ST 2km...

Media Converter 12-Slot Rack

Wed, 15 Apr 2009 12:36:34 GMT

Simplify your media converter installation with Transition Networks's Media Converter Rack. This rack-mountable unit supports up to twelve Transition Networks's stand-alone media converters. Transition's unique enclosure design makes multiple connections and consolidates them into a single device; making network connections easier and more efficient....

Transceiver 10B5-10BFL MM SC

Wed, 15 Apr 2009 12:36:34 GMT

The Transition Networks E-FRL-MC05 series transceiver with LinkAlert is a media access unit (MAU) that connects the AUI port of any DTE, repeater, or other network device, either directly or through an AUI cable, to an Ethernet 10BASE-FL device. The 10BASE-FL device is connected to the E-FRL-MC05 media converter through multimode fiber OR singlemode fiber, selected by E-FRL-MC05 model number....

Analog CCTV Transmitter

Wed, 15 Apr 2009 12:36:34 GMT

Analog CCTV Transmitter Standalone Media Cvtr, Transition Networks s analog composite video media transmitter, J/VD-TX-01, converts a CCTV signal from cameras to multimode or single mode fiber for up to 10 km. Transition Networks s analog video media receiver, J/VD-RX-01, converts the optical signal back to an analog composite video signal. All conversion is performed in real time. Automatic gain control installed on both Transmitter and Receiver maintains desired quality of video s contrast and brightness for extended distances. No field adjustments are necessary. Wide input range power supply allows for multiple choices of power source including camera power supply....

Analog CCTV Reciever Standalon

Wed, 15 Apr 2009 12:36:34 GMT

Transition Networks s analog video media receiver, J/VD-RX-01, converts the optical signal back to an analog composite video signal. All conversion is performed in real time. Automatic gain control installed on both Transmitter and Receiver maintains desired quality of video s contrast and brightness for extended distances. No field adjustments are necessary. Wide input range power supply allows for multiple choices of power source including camera power supply....

Analog CCTV Miniature Receiver

Wed, 15 Apr 2009 12:36:34 GMT

Analog CCTV Miniature Reciever Standalone Media Cvtr...

UTP Redundant Transceiver

Wed, 15 Apr 2009 12:36:34 GMT

MiLAN 100Mbps UTP Redundant Transceiver (3Port)...

1000 Base Just Convert-IT

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- J/GE-CF-01-LX1 VENDOR- TRANSITION NETWORKS

FEATURES- Just Convert-IT Gigabit Stand-alone Media Converter
1000BaseT to 1000BaseLX SM (SC), 10km.
The Just Convert-IT 1000BASE-T to 1000BASE-SX/LX Media converter is
an inexpensive, no frills way to extend the distance between
Gigabit Ethernet connections with the use of fiber optic cable,
while maintaining the same quality and reliability found on
Transitions full-featured line of products.
* Extend Network Distance
Convert 1000BASE-T ports over to 1000BASE-SX/LX on a port-by-port basis.
Used individually or in pairs, this media converter can extend Gigabit
Ethernet up to 2 km over multimode fiber or up to 65 km over single mode
fiber.
* Auto-Negotiation (802.3u)
Allows devices to perform automatic configuration to achieve the best
possible mode of operation over a link.
* AutoCross
Automatically detects and configures the twisted pair port on the
converter to the correct MDI or MDI-X configuration.
* Automatic Link Restoration
Transition Networks converters will automatically re-establish link in
all network conditions.

-- SPECIFICATIONs ----------------------------------
CONNECTORS - (1) 1000BaseT (RJ-45) [100 m/328 ft.]
(1) 1000BaseLX 1310nm single mode (SC) [10 km/6.2 miles]
STANDARDS - IEEE 802.3
FIBER OPTIC CONNECTOR-
Single mode Min TX PWR : -13 dBm
Max TX PWR : - 3 dBm
RX Sensitivity: -20 dBm
Max In PWR : - 3 dBm
Link Budget : 7.00 dB
INDICATORS - LEDs for Power, Fiber Link, Link/Activity, Duplex/Collision
APPROVALS - FCC Class A, CISPR/EN55022 Class A, EN55024, CE Mark
POWER - External AC/DC required; +12 VDC, 0.4A
...

MC 10BT-10BFX MM SC

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- J/E-CF-02SC VENDOR- TRANSITION NETWORKS

FEATURES- Just Convert-IT Ethernet Stand-alone Media Converter
10BaseT to 10BaseFL MM (SC), 2km.
The "Just Convert-IT" 10BASE-T to 10BASE-FL Media Converter is an
inexpensive, no frills, way to extend the distance between Ethernet
connections with the use of fiber optic cable; while maintaining
the same quality and reliability found on Transition's full-
featured line of products.
* Connect Legacy Networking Equipment
Connect an existing 10BASE-T segment or device, such as a printer, that
does not support a fiber optic connection, to an Ethernet fiber optic
backbone.
* Unit and Port LEDs allow for quick status information.
* Cost-effective way to extend distance.
* Can be rack-mounted in the E-MCR-04.

-- SPECIFICATIONs ----------------------------------
CONNECTORS - (1) 10BaseT (RJ-45) [100 m/328 ft.]
(1) 10BaseFL 850nm multimode (SC) [2 km/1.2 miles]
STANDARDS - IEEE Std. 802.3 10BASE-T; 10BASE-FL
FIBER OPTIC CONNECTOR-
Multimode Min TX PWR : -19.0 dBm
Max TX PWR : -14.0 dBm
RX Sensitivity: -32.5 dBm
Max In PWR : -14.0 dBm
Link Budget : 13.50 dB
INDICATORS - Power: On for normal operation
Copper: Steady = Link; Flashing = RX Data
Fiber: Steady = Link; Flashing = RX Data
APPROVALS - FCC Class A, CISPR/EN55022 Class A, EN55024, CE Mark
POWER - External AC/DC required; 12VDC nominal, 500mA max.
Consumption 2.8 watts
DIMENSIONS - 3.0"w x 1.0"h x 3.9"d...

MC 10BT-10BFX MM ST

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- J/E-CF-02 VENDOR- TRANSITION NETWORKS

FEATURES- Just Convert-IT Ethernet Stand-alone Media Converter
10BaseT to 10BaseFL MM (ST), 2km.
The "Just Convert-IT" 10BASE-T to 10BASE-FL Media Converter is an
inexpensive, no frills, way to extend the distance between Ethernet
connections with the use of fiber optic cable; while maintaining
the same quality and reliability found on Transition's full-
featured line of products.
* Connect Legacy Networking Equipment
Connect an existing 10BASE-T segment or device, such as a printer, that
does not support a fiber optic connection, to an Ethernet fiber optic
backbone.
* Unit and Port LEDs allow for quick status information.
* Cost-effective way to extend distance.
* Can be rack-mounted in the E-MCR-04.

-- SPECIFICATIONs ----------------------------------
CONNECTORS - (1) 10BaseT (RJ-45) [100 m/328 ft.]
(1) 10BaseFL 850nm multimode (ST) [2 km/1.2 miles]
STANDARDS - IEEE Std. 802.3 10BASE-T; 10BASE-FL
FIBER OPTIC CONNECTOR-
Multimode Min TX PWR : -19.0 dBm
Max TX PWR : -14.0 dBm
RX Sensitivity: -34.0 dBm
Max In PWR : -15.2 dBm
Link Budget : 15.00 dB
INDICATORS - Power: On for normal operation
Copper: Steady = Link; Flashing = RX Data
Fiber: Steady = Link; Flashing = RX Data
APPROVALS - FCC Class A, CISPR/EN55022 Class A, EN55024, CE Mark
POWER - External AC/DC required; 12VDC nominal, 500mA max.
Consumption 2.8 watts
DIMENSIONS - 3.0"w x 1.0"h x 3.9"d...

Stand.Coverter 10/100/1000Base

Wed, 15 Apr 2009 12:36:34 GMT

10/100/1000Base-T to 1000Base-SX 850nm MM SC Stand Alone Converter...

MC ATM-OC-3-SDH-SONET

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- F-SM-MM-02 VENDOR- TRANSITION NETWORKS

FEATURES- ATM or OC-3 or Fast Ethernet Networks
Save money by purchasing Fast Ethernet devices with lower cost
multimode fiber interfaces and use converters to introduce single
mode fiber only where you need it.
* Extend distances up to 80 km over single mode fiber with these network
protocols that use 1300nm wavelength for fiber optic transmission. In
fact, distances can be extended in any 155 Mbps networking protocol.
* Extend a Fast Ethernet backbone connection up to 80 km for MAN
(metropolitan area network) applications.

-- SPECIFICATIONs -----------------------------------
CONNECTORS - Port One : 1300nm multimode (SC) [2 km/1.2 miles]
Port Two : 1310nm single mode (SC) [20 km/12.4 miles]
PERFORMNACE - Multimode Min TX PWR: -19.0 dBm
Max TX PWR: -14.0 dBm
RX Sensitivity: -30.0 dBm
Max In PWR: -14.0 dBm
Link Budget: 11.00 dB
Single Mode Min TX PWR: -15.0 dBm
Max TX PWR: -8.0 dBm
RX Sensitivity: -31.0 dBm
Max In PWR: -8.0 dBm
Link Budget: 16.00 dB
INDICATORS - PWR: Steady green LED indicates connection to external AC
power.
LKM or Link (Left): Lit for MM Link
LKS or Link (Right): Lit for SM Link
APPROVALS - FCC Class A, CISPR/EN55022 Class A, EN55024, EN61000, CE
Mark.
UL listed and CSA certified
POWER SOURCE - External AC/DC required; 12V DC; 0.5A; unregulated; standard
SPS-48V: optional external 48VDC power supply; Output
12VDC; .8A; 14 watts max.
DIMENSIONS - 3.0"w x 1.0"h x...

1000 Base Just Convert-IT

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- J/GE-CF-01-SX VENDOR- TRANSITION NETWORKS

FEATURES- Just Convert-IT Gigabit Stand-alone Media Converter
1000BaseT to 1000BaseSX MM (SC), 220/550m.
The Just Convert-IT 1000BASE-T to 1000BASE-SX/LX Media converter is
an inexpensive, no frills way to extend the distance between
Gigabit Ethernet connections with the use of fiber optic cable,
while maintaining the same quality and reliability found on
Transitions full-featured line of products.
* Extend Network Distance
Convert 1000BASE-T ports over to 1000BASE-SX/LX on a port-by-port basis.
Used individually or in pairs, this media converter can extend Gigabit
Ethernet up to 2 km over multimode fiber or up to 65 km over single mode
fiber.
* Auto-Negotiation (802.3u)
Allows devices to perform automatic configuration to achieve the best
possible mode of operation over a link.
* AutoCross
Automatically detects and configures the twisted pair port on the
converter to the correct MDI or MDI-X configuration.
* Automatic Link Restoration
Transition Networks converters will automatically re-establish link in
all network conditions.

-- SPECIFICATIONs ----------------------------------
CONNECTORS - (1) 1000BaseT (RJ-45) [100 m/328 ft.]
(1) 1000BaseSX 850nm Multimode (SC)
[62.5/125um: 220 m/722 ft.; 50/125um: 550 m/1804 ft.]
STANDARDS - IEEE 802.3
FIBER OPTIC CONNECTOR-
Multi mode Min TX PWR : -10 dBm
Max TX PWR : - 4 dBm
RX Sensitivity: -17 dBm
Max In PWR : - 0 dBm
Link Budget : 7.00 dB
INDICATORS - LEDs for Power, Fiber Link, Link/Activity, Duplex/Collision
APPROVALS - FCC Class A, CISPR/EN55022 Class A, EN55024, CE Mark
POWER ...

Media Cnvtr 100BTX-100FX SM SC

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- J/E-PSW-FX-02SM VENDOR- TRANSITION NETWORKS

FEATURES- Just Convert-IT 10/100 Bridging Stand-alone Media Converter
10/100BaseTX to 100BaseFX SM (SC), 20km.
The "Just Convert-IT" Bridging Media Converter is an inexpensive, no
frills way to extend the distance between connections with
different speeds or duplex using fiber optic cable; while
maintaining the same quality and reliability found on Transitions
full-featured line of products.
* Connect Legacy Networking Equipment
Connect an existing 10Mbps device to 100Mbps devices.
* Eliminate Collision Domains
Connect two half-duplex hubs with a full-duplex connection over fiber
containing no collisions.
* Unit and Port LEDs allow for quick status information.
* Auto-Negotiation (802.3u)
Allows devices to perform automatic configuration to achieve the best
possible mode of operation over a link.
* AutoCross
Automatically detects and configures the twisted pair port on the
converter to the correct MDI or MDI-X configuration.
Ability to force 10Mbps or 100Mbps (TP port) and full or half-duplex on
both copper and fiber.
* Automatic Link Restoration
Transition Networks converters will automatically re-establish link in
all network conditions.

-- SPECIFICATIONs ----------------------------------
CONNECTORS - (1) 100BaseTX (RJ-45) [100 m/328 ft.]
(1) 100BaseFX 1310nm single mode (SC) [20 km/12.4 miles]
STANDARDS - IEEE 802.3, IEEE 802.3ab
FIBER OPTIC CONNECTOR-
Single mode Min TX PWR : -15 dBm
Max TX PWR : - 8 dBm
RX Sensitivity: -31 dBm
Max In PWR : - 8 dBm
Link Budget : 16.00 dB
SWITCHES - SW1: Auto-Negotiation On/Off
SW2:...

Media Cnvtr 100BTX-100FX MM SC

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- J/E-PSW-FX-02SC VENDOR- TRANSITION NETWORKS

FEATURES- Just Convert-IT 10/100 Bridging Stand-alone Media Converter
10/100BaseTX to 100BaseFX MM (SC), 2km.
The "Just Convert-IT" Bridging Media Converter is an inexpensive, no
frills way to extend the distance between connections with
different speeds or duplex using fiber optic cable; while
maintaining the same quality and reliability found on Transitions
full-featured line of products.
* Connect Legacy Networking Equipment
Connect an existing 10Mbps device to 100Mbps devices.
* Eliminate Collision Domains
Connect two half-duplex hubs with a full-duplex connection over fiber
containing no collisions.
* Unit and Port LEDs allow for quick status information.
* Auto-Negotiation (802.3u)
Allows devices to perform automatic configuration to achieve the best
possible mode of operation over a link.
* AutoCross
Automatically detects and configures the twisted pair port on the
converter to the correct MDI or MDI-X configuration.
Ability to force 10Mbps or 100Mbps (TP port) and full or half-duplex on
both copper and fiber.
* Automatic Link Restoration
Transition Networks converters will automatically re-establish link in
all network conditions.

-- SPECIFICATIONs ----------------------------------
CONNECTORS - (1) 100BaseTX (RJ-45) [100 m/328 ft.]
(1) 100BaseFX 1300nm multimode (SC) [2 km/1.2 miles]
STANDARDS - IEEE 802.3, IEEE 802.3ab
FIBER OPTIC CONNECTOR-
Multimode Min TX PWR : -19 dBm
Max TX PWR : -14 dBm
RX Sensitivity: -30 dBm
Max In PWR : -14 dBm
Link Budget : 11.00 dB
SWITCHES - SW1: Auto-Negotiation On/Off
SW2: Full/Half-Dupl...

Media Cnvtr 100BTX-100FX MM ST

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- J/E-PSW-FX-02 VENDOR- TRANSITION NETWORKS

FEATURES- Just Convert-IT 10/100 Bridging Stand-alone Media Converter
10/100BaseTX to 100BaseFX MM (ST), 2km.
The "Just Convert-IT" Bridging Media Converter is an inexpensive, no
frills way to extend the distance between connections with
different speeds or duplex using fiber optic cable; while
maintaining the same quality and reliability found on Transitions
full-featured line of products.
* Connect Legacy Networking Equipment
Connect an existing 10Mbps device to 100Mbps devices.
* Eliminate Collision Domains
Connect two half-duplex hubs with a full-duplex connection over fiber
containing no collisions.
* Unit and Port LEDs allow for quick status information.
* Auto-Negotiation (802.3u)
Allows devices to perform automatic configuration to achieve the best
possible mode of operation over a link.
* AutoCross
Automatically detects and configures the twisted pair port on the
converter to the correct MDI or MDI-X configuration.
Ability to force 10Mbps or 100Mbps (TP port) and full or half-duplex on
both copper and fiber.
* Automatic Link Restoration
Transition Networks converters will automatically re-establish link in
all network conditions.

-- SPECIFICATIONs ----------------------------------
CONNECTORS - (1) 100BaseTX (RJ-45) [100 m/328 ft.]
(1) 100BaseFX 1300nm multimode (ST) [2 km/1.2 miles]
STANDARDS - IEEE 802.3, IEEE 802.3ab
FIBER OPTIC CONNECTOR-
Multimode Min TX PWR : -19 dBm
Max TX PWR : -14 dBm
RX Sensitivity: -30 dBm
Max In PWR : -14 dBm
Link Budget : 11.00 dB
SWITCHES - SW1: Auto-Negotiation On/Off
SW2: Full/Half-Dupl...

MC 10BT-10BFL MM SC

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- E-TBT-FRL-05SC VENDOR- TRANSITION NETWORKS

FEATURES- Ethernet Stand-Alone Media Converter
10BaseT to 10BaseFL MM (SC)[2 km].
Two 10BASE-T to 10BASE-FL Media Converters used back-to-back extend
the distance between two 10BASE-T devices up to 5 km using
multimode fiber or up to 40 km using single mode fiber without a
repeater.
Connect your workgroup to a distant server or a central switch; or
extend distances between like and unlike devices in either full or
half-duplex modes.
* Integrate mixed cabling environments using either switched or shared
Ethernet.
* AutoCross
Automatically detects and configures the twisted pair port on the
converter to the correct MDI or MDI-X configuration.
* Link Pass Through
Link Pass Through is a troubleshooting feature that allows the media
converter to monitor both the fiber and copper RX ports for loss of
signal.

-- SPECIFICATIONs ----------------------------------
CONNECTORS - (1) 10BaseT (RJ-45) [100 m/328 ft.]
(1) 10BaseFL 850nm multimode (SC) [2 km/1.2 miles]
STANDARDS - IEEE Std. 802.3 10BASE-T; 10BASE-FL
FIBER OPTIC CONNECTOR-
Multi mode Min TX PWR : -17.5 dBm
Max TX PWR : -11.0 dBm
RX Sensitivity: -41.5 dBm
Max In PWR : -11.0 dBm
Link Budget : 24.0 dB
INDICATORS - LEDs for Power, Link, Receive
APPROVALS - UL listed and CSA certified
FCC Class A, CISPR/EN55022 Class A, EN55024, EN61000,
CE Mark.
POWER - External AC/DC required: 12 VDC, 0.5 A, unregulated,
standard.
DIMENSIONS - 3.0"w x 1.0"h x 3.9"d...

MC 10BT-10BFL MM ST

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- E-TBT-FRL-05 VENDOR- TRANSITION NETWORKS

FEATURES- Ethernet Stand-Alone Media Converter
10BaseT to 10BaseFL MM (ST)[2 km].
Two 10BASE-T to 10BASE-FL Media Converters used back-to-back extend
the distance between two 10BASE-T devices up to 5 km using
multimode fiber or up to 40 km using single mode fiber without a
repeater.
Connect your workgroup to a distant server or a central switch; or
extend distances between like and unlike devices in either full or
half-duplex modes.
* Integrate mixed cabling environments using either switched or shared
Ethernet.
* AutoCross
Automatically detects and configures the twisted pair port on the
converter to the correct MDI or MDI-X configuration.
* Link Pass Through
Link Pass Through is a troubleshooting feature that allows the media
converter to monitor both the fiber and copper RX ports for loss of
signal.

-- SPECIFICATIONs ----------------------------------
CONNECTORS - (1) 10BaseT (RJ-45) [100 m/328 ft.]
(1) 10BaseFL 850nm multimode (ST) [2 km/1.2 miles]
STANDARDS - IEEE Std. 802.3 10BASE-T; 10BASE-FL
FIBER OPTIC CONNECTOR-
Multi mode Min TX PWR : -19.0 dBm
Max TX PWR : -11.0 dBm
RX Sensitivity: -25.4 dBm
Max In PWR : - 9.2 dBm
Link Budget : 6.4 dB
INDICATORS - LEDs for Power, Link, Receive
APPROVALS - UL listed and CSA certified
FCC Class A, CISPR/EN55022 Class A, EN55024, EN61000,
CE Mark.
POWER - External AC/DC required: 12 VDC, 0.5 A, unregulated,
standard.
DIMENSIONS - 3.0"w x 1.0"h x 3.9"d...

MC 100BTX-100FX MM SC

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- E-100BTX-FX-05SC VENDOR- TRANSITION NETWORKS

FEATURES- Fast Ethernet Stand-Alone Media Converter
100BaseTX to 100BaseFX MM (SC)[2 km].
Used in pairs, this media converter can extend distances between two
twisted pair switches or a switch and a server up to 2 km over
multimode fiber, or up to 120 km over single mode fiber.
Using one media converter, a switch with a copper port can be
connected to a switch with an existing fiber interface.
* Operates under heavy traffic loads without excess heat, so there is no
need for a failure-prone internal fan.
* Round trip delay of only 40 bit times--far below the Class II rating of
92 bit times.
* Auto-Negotiation (802.3u)
Allows devices to perform automatic configuration to achieve the best
possible mode of operation over a link.
* AutoCross
Automatically detects and configures the twisted pair port on the
converter to the correct MDI or MDI-X configuration.
* Link Pass Through
Link Pass Through is a troubleshooting feature that allows the media
converter to monitor both the fiber and copper RX ports for loss of
signal.
* Far End Fault (FEF)
A troubleshooting feature that is generally used in conjunction with
Link Pass Through to notify both end devices of a loss of link.
* Automatic Link Restoration
Transition Networks's converters will automatically re-establish link in
all network conditions.
* Pause (IEEE 802.3xy)
Pause signaling is an IEEE feature that temporarily suspends data
transmission between two devices in the event that one of the devices
becomes overwhelmed.
* The converters will also automatically re-establish link when connected
to two 10/100 auto-negotiating switches if link is lost. With other
manufacturers' converters the user must intervene to re-establish link.
...

MC 100BTX-100BFX MM ST

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- E-100BTX-FX-05 VENDOR- TRANSITION NETWORKS

FEATURES- Fast Ethernet Stand-Alone Media Converter
100BaseTX to 100BaseFX MM (ST)[2 km].
Used in pairs, this media converter can extend distances between two
twisted pair switches or a switch and a server up to 2 km over
multimode fiber, or up to 120 km over single mode fiber.
Using one media converter, a switch with a copper port can be
connected to a switch with an existing fiber interface.
* Operates under heavy traffic loads without excess heat, so there is no
need for a failure-prone internal fan.
* Round trip delay of only 40 bit times--far below the Class II rating of
92 bit times.
* Auto-Negotiation (802.3u)
Allows devices to perform automatic configuration to achieve the best
possible mode of operation over a link.
* AutoCross
Automatically detects and configures the twisted pair port on the
converter to the correct MDI or MDI-X configuration.
* Link Pass Through
Link Pass Through is a troubleshooting feature that allows the media
converter to monitor both the fiber and copper RX ports for loss of
signal.
* Far End Fault (FEF)
A troubleshooting feature that is generally used in conjunction with
Link Pass Through to notify both end devices of a loss of link.
* Automatic Link Restoration
Transition Networks's converters will automatically re-establish link in
all network conditions.
* Pause (IEEE 802.3xy)
Pause signaling is an IEEE feature that temporarily suspends data
transmission between two devices in the event that one of the devices
becomes overwhelmed.
* The converters will also automatically re-establish link when connected
to two 10/100 auto-negotiating switches if link is lost. With other
manufacturers' converters the user must intervene to re-establish link.
...

MC 100BTX-100BFX SM SC

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- E-100BTX-FX-05SM VENDOR- TRANSITION NETWORKS

FEATURES- Fast Ethernet Stand-Alone Media Converter
100BaseTX to 100BaseFX SM (SC)[20 km].
Used in pairs, this media converter can extend distances between two
twisted pair switches or a switch and a server up to 2 km over
multimode fiber, or up to 120 km over single mode fiber.
Using one media converter, a switch with a copper port can be
connected to a switch with an existing fiber interface.
* Operates under heavy traffic loads without excess heat, so there is no
need for a failure-prone internal fan.
* Round trip delay of only 40 bit times--far below the Class II rating of
92 bit times.
* Auto-Negotiation (802.3u)
Allows devices to perform automatic configuration to achieve the best
possible mode of operation over a link.
* AutoCross
Automatically detects and configures the twisted pair port on the
converter to the correct MDI or MDI-X configuration.
* Link Pass Through
Link Pass Through is a troubleshooting feature that allows the media
converter to monitor both the fiber and copper RX ports for loss of
signal.
* Far End Fault (FEF)
A troubleshooting feature that is generally used in conjunction with
Link Pass Through to notify both end devices of a loss of link.
* Automatic Link Restoration
Transition Networks's converters will automatically re-establish link in
all network conditions.
* Pause (IEEE 802.3xy)
Pause signaling is an IEEE feature that temporarily suspends data
transmission between two devices in the event that one of the devices
becomes overwhelmed.
* The converters will also automatically re-establish link when connected
to two 10/100 auto-negotiating switches if link is lost. With other
manufacturers' converters the user must intervene to re-establish link.
...

Single Mode Media Converter

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- ET90110SM30 VENDOR- Startech.com

FEATURES- 10/100 30km Single Mode Media Converter
StarTech.coms high-speed ET90110SM30 media converters are engineered
to make fiber connections simple and reliable for even the most
demanding network specialists. StarTech.coms ET90110SM30 is the
perfect solution for connecting buildings to main networks.
Easy to set up and install in a matter of seconds. This reliable and
compact fiber optic media converter features a heavy-duty power
supply to withstand the most challenging environments.
ET90110SM30 easily converts between 10 Base-T or 100 Base-TX
electrical Ethernet signals and 100 Base-FX optical Ethernet
signals. While supporting a maximum single mode fiber optic cable
distance of 30km, it allows full wire speed of 148,800 packet per
second throughput that prevents bottlenecks and keeps your data
flowing quickly and smoothly.
Guaranteed compatibility with 3COM, Cisco, Lucent and Nortel networks
and fully complies with the IEEE 802.3 and 802.3u standard.

-- SPECIFICATIONs -----------------------------------
CONNECTORS - (1) RJ45 Female
(1) Fiber Optic SC Female
INDICATORS - LEDs for Power, Active, Full Duplex/Half Duplex, Link
APPROVALS - FCC, CE
...

Media Cnvrter 1000BT-1000BSX

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- DMC-700SC VENDOR- D-LINK

FEATURES- Media Converter
Converts between 1000BaseT and 1000BaseSX.
The DMC-700SC is a media converter designed to convert 1000BASE-SX
fiber to 1000Base-T copper media or vice versa. Designed under IEEE
802.3ab and 802.3z standards, the DMC-700SC is designed for use
with multi-mode fiber cable utilizing the SC-Type connector. The
DMC-700SC supports shortwave (SX) laser specification at a full
wire speed forwarding rate. Other features of this module include
the ability to be used as a stand alone device (no chassis
required), Auto MDI/MDI-X for TX port, Auto negotiation of duplex
mode on TX port, and front panel status LEDs. The DMC-700SC will
transmit at extended fiber optic distances utilizing multimode
fiber up to 550 meters.

-- SPECIFICATIONs ------------------------------------
MEDIA INTERFACE- RJ-45, SC
STANDARDS - IEEE802.3ab 1000BASE-TX, IEEE802.3z 1000BASE-SX
TRANSFER RATE - 14,880,000 pps for 1000Mbps
DUPLEX MODE - Full Duplex Mode
INDICATORS - LEDs for Power, Link/Activity
CABLE - 1000BaseT : 4 pair Cat. 5, EIA/TIA-568 100-ohm twisted-
pair (STP), up to 100m.
1000BaseSX: 62.5/125 m multi-mode fiber optic cable, up to
220m.
50/125 m multi-mode fiber optic cable, up to
550m.
APPROVALS - FCC B, CE, VCCI B
POWER- External power adapter 7.5V 1.5A; Consumption 5.5 Watts (maximum)
SIZE - 4.72" x 3.46" x 0.98" WT.- 10.75 oz.
...

RJ45-Mmode Media Converter

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- ET9100SC VENDOR- STARTECH.COM LTD...

Media CNVTR 1000TX-1000SX MMF

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- MIL-RC6113SXUS VENDOR- MILAN TECHNOLOGY

FEATURES- Raven Series Standalone Media Converter
100/1000BaseTX to 1000BaseSX SC MMF.
The Raven Series of Converters offers connectivity solutions for a
broad range of environments. Whether connecting two remote
locations, or solving a difficult wiring closet issue, the Raven
Series has a product to meet your needs. The standalone converters
are ideal for remote locations requiring a single, cost effective
fiber link. These converters may be consolidated into a 19 inch
rack system, allowing for utilization of a common product in the
main or intermediate distribution frame and at the remote location.
For those needing visibility into how their network is operating, a
managed media conversion system is available.
* The Raven Series is designed with ease of use in mind. The UTP port will
auto-detect the cabling type (cross over or straight through), the
polarity of the pins, the speed of the port and the mode of the port
without any user intervention. No more concerns about what type of device
the converter is connecting, whether hub or server. The broad range of
media for the fiber port makes for optimal flexibility in designing the
network, and upgrading the network in the future.
* This product has been designed with diagnostic functions as well. The
LinkSentry feature allows for passing through physical layer failures
from one media to the other. This allows for a higher reliability in your
network by making all components aware of network failures as they occur.
The managed system takes this further by sending traps when link failures
are seen on the ports.
* The ease of use, flexibility in network design, Advanced diagnostic
capabilities and management features make the Raven series of converter...

Media CNVTR 1000TX-1000LX SMF

Wed, 15 Apr 2009 12:36:34 GMT

MiLAN 10/100/1000BaseTX to 1000BaseLX SC Multi Mode Fiber Media Converter....

Media CNVTR 100BTX-100FX SC SM

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- MIL-RC31W15US VENDOR- MILAN TECHNOLOGY

FEATURES- Raven Series Standalone Media Converter
10/100BaseTX to 100BaseFX SC SMF TX 1550nm WDM.
The Raven Series of Converters offers connectivity solutions for a
broad range of environments. Whether connecting two remote
locations, or solving a difficult wiring closet issue, the Raven
Series has a product to meet your needs. The standalone converters
are ideal for remote locations requiring a single, cost effective
fiber link. These converters may be consolidated into a 19 inch
rack system, allowing for utilization of a common product in the
main or intermediate distribution frame and at the remote location.
For those needing visibility into how their network is operating, a
managed media conversion system is available.
* The Raven Series is designed with ease of use in mind. The UTP port will
auto-detect the cabling type (cross over or straight through), the
polarity of the pins, the speed of the port and the mode of the port
without any user intervention. No more concerns about what type of device
the converter is connecting, whether hub or server. The broad range of
media for the fiber port makes for optimal flexibility in designing the
network, and upgrading the network in the future.
* This product has been designed with diagnostic functions as well. The
LinkSentry feature allows for passing through physical layer failures
from one media to the other. This allows for a higher reliability in your
network by making all components aware of network failures as they occur.
The managed system takes this further by sending traps when link failures
are seen on the ports.
* The ease of use, flexibility in network design, Advanced diagnostic
capabilities and management features make the Raven series o...

Media CNVTR 100BTX-100FX SC SM

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- MIL-RC31W13US VENDOR- MILAN TECHNOLOGY

FEATURES- Raven Series Standalone Media Converter
10/100BaseTX to 100BaseFX SC SMF TX 1310nm WDM.
The Raven Series of Converters offers connectivity solutions for a
broad range of environments. Whether connecting two remote
locations, or solving a difficult wiring closet issue, the Raven
Series has a product to meet your needs. The standalone converters
are ideal for remote locations requiring a single, cost effective
fiber link. These converters may be consolidated into a 19 inch
rack system, allowing for utilization of a common product in the
main or intermediate distribution frame and at the remote location.
For those needing visibility into how their network is operating, a
managed media conversion system is available.
* The Raven Series is designed with ease of use in mind. The UTP port will
auto-detect the cabling type (cross over or straight through), the
polarity of the pins, the speed of the port and the mode of the port
without any user intervention. No more concerns about what type of device
the converter is connecting, whether hub or server. The broad range of
media for the fiber port makes for optimal flexibility in designing the
network, and upgrading the network in the future.
* This product has been designed with diagnostic functions as well. The
LinkSentry feature allows for passing through physical layer failures
from one media to the other. This allows for a higher reliability in your
network by making all components aware of network failures as they occur.
The managed system takes this further by sending traps when link failures
are seen on the ports.
* The ease of use, flexibility in network design, Advanced diagnostic
capabilities and management features make the Raven series o...

Media CNVTR 100BTX-100FX SC SM

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- MIL-RC3113-60US VENDOR- MILAN TECHNOLOGY

FEATURES- Raven Series Standalone Media Converter
10/100BaseTX to 100BaseFX SC SMF 60km.
The Raven Series of Converters offers connectivity solutions for a
broad range of environments. Whether connecting two remote
locations, or solving a difficult wiring closet issue, the Raven
Series has a product to meet your needs. The standalone converters
are ideal for remote locations requiring a single, cost effective
fiber link. These converters may be consolidated into a 19 inch
rack system, allowing for utilization of a common product in the
main or intermediate distribution frame and at the remote location.
For those needing visibility into how their network is operating, a
managed media conversion system is available.
* The Raven Series is designed with ease of use in mind. The UTP port will
auto-detect the cabling type (cross over or straight through), the
polarity of the pins, the speed of the port and the mode of the port
without any user intervention. No more concerns about what type of device
the converter is connecting, whether hub or server. The broad range of
media for the fiber port makes for optimal flexibility in designing the
network, and upgrading the network in the future.
* This product has been designed with diagnostic functions as well. The
LinkSentry feature allows for passing through physical layer failures
from one media to the other. This allows for a higher reliability in your
network by making all components aware of network failures as they occur.
The managed system takes this further by sending traps when link failures
are seen on the ports.
* The ease of use, flexibility in network design, Advanced diagnostic
capabilities and management features make the Raven series of convert...

Media CNVTR 100BTX-100FX SC SM

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- MIL-RC3113-30US VENDOR- MILAN TECHNOLOGY

FEATURES- Raven Series Standalone Media Converter
10/100BaseTX to 100BaseFX SC SMF 30km.
The Raven Series of Converters offers connectivity solutions for a
broad range of environments. Whether connecting two remote
locations, or solving a difficult wiring closet issue, the Raven
Series has a product to meet your needs. The standalone converters
are ideal for remote locations requiring a single, cost effective
fiber link. These converters may be consolidated into a 19 inch
rack system, allowing for utilization of a common product in the
main or intermediate distribution frame and at the remote location.
For those needing visibility into how their network is operating, a
managed media conversion system is available.
* The Raven Series is designed with ease of use in mind. The UTP port will
auto-detect the cabling type (cross over or straight through), the
polarity of the pins, the speed of the port and the mode of the port
without any user intervention. No more concerns about what type of device
the converter is connecting, whether hub or server. The broad range of
media for the fiber port makes for optimal flexibility in designing the
network, and upgrading the network in the future.
* This product has been designed with diagnostic functions as well. The
LinkSentry feature allows for passing through physical layer failures
from one media to the other. This allows for a higher reliability in your
network by making all components aware of network failures as they occur.
The managed system takes this further by sending traps when link failures
are seen on the ports.
* The ease of use, flexibility in network design, Advanced diagnostic
capabilities and management features make the Raven series of convert...

RJ45 to Fiber Media Converter

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- ET9011SC VENDOR- STARTECH.COM LTD...

Media CNVTR 100BTX-100FX SC MM

Wed, 15 Apr 2009 12:36:34 GMT

MiLAN 10/100BaseTX to 100BaseFX SC Multi Mode Fiber (2km) Media Converter....

Media CNVTR 100BTX-100FX ST MM

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- MIL-RC3112US VENDOR- MILAN TECHNOLOGY

FEATURES- Raven Series Standalone Media Converter
10/100BaseTX to 100BaseFX ST MMF 2km.
The Raven Series of Converters offers connectivity solutions for a
broad range of environments. Whether connecting two remote
locations, or solving a difficult wiring closet issue, the Raven
Series has a product to meet your needs. The standalone converters
are ideal for remote locations requiring a single, cost effective
fiber link. These converters may be consolidated into a 19 inch
rack system, allowing for utilization of a common product in the
main or intermediate distribution frame and at the remote location.
For those needing visibility into how their network is operating, a
managed media conversion system is available.
* The Raven Series is designed with ease of use in mind. The UTP port will
auto-detect the cabling type (cross over or straight through), the
polarity of the pins, the speed of the port and the mode of the port
without any user intervention. No more concerns about what type of device
the converter is connecting, whether hub or server. The broad range of
media for the fiber port makes for optimal flexibility in designing the
network, and upgrading the network in the future.
* This product has been designed with diagnostic functions as well. The
LinkSentry feature allows for passing through physical layer failures
from one media to the other. This allows for a higher reliability in your
network by making all components aware of network failures as they occur.
The managed system takes this further by sending traps when link failures
are seen on the ports.
* The ease of use, flexibility in network design, Advanced diagnostic
capabilities and management features make the Raven series of converte...

RJ45 to Fiber Media Converter

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- ET90110ST VENDOR- STARTECH.COM LTD...

Media CNVTR 100BTX-100FX SC SM

Wed, 15 Apr 2009 12:36:34 GMT

MiLAN 10/100BaseTX to 100BaseFX SC Single Mode Fiber (15km) Media Converter....

Media Converter 100BTX-100BFX

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- DFE855 VENDOR- D-LINK

FEATURES- Twisted-Pair to Fiber-optics conversion.
One single shielded RJ45 100BaseTX port and one fiber port using
SC connectors. Supports conversion of signals from Fast Ethernet
100BaseTX cabling to fiber optic cabling.
* IEEE 802.3u standard.
* Full/half duplex is supported and auto-detected.
* Supported transmission distances are up to 100 m for 100BaseTX, and 2 km
for fiber-optics.
* Easy-to-view diagnostic LEDs.
* An AC power adapter is required for DC power conversion and input.

CONNECTORs - (1) 100BaseTX/RJ-45 port
(1) 10BaseFX/SC port
NETWORK MEDIA- 100BaseTX: 2 pair UTP Cat. 5 (100 meters) EIA/TIA-586 100 ohm
screened twisted-pair (STP) (100 meters)
10BaseFX : Fiber optics 62.5/125 micron multimode (2 km)

tech@irvine.dlink.com

MANUFACTURER WARRANTY: 3 YEARS...

RS-232 Serial Converter

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- IC485S VENDOR- STARTECH.COM LTD

FEATURES- RS-232 to RS-485/422 Serial Interface Converter
Changing line signals is no longer a problem. StarTech.com s IC485S
converts RS-232 serial interfaces to RS-485/422 serial interfaces.
This 2 in 1 converter converts RS232C to either the RS 485 or
RS 422 interface. Other features include DCE/DTE selectable modes,
point to point multidrop configuration and the ability to monitor
RS 485/422 signals.

Data rate : Up to 1MB/sec
Connectors: RS-232 connector: DB25 Female
RS-485 connector: RJ11 Female or 4 terminal block
Dimensions: 54 x 74 x 19 mm
Power: Self-powered or DC 9V 200mA

MANUFACTURER WARRANTY: 1 YEAR...