Media Converters- Modular

Point System RPS for 8Slot

Wed, 15 Apr 2009 12:36:34 GMT

Transition Point System Redundant Power Supply Option for 8-Slot Chassis, 120/240 VAC....

Point System RPS for 13Slot

Wed, 15 Apr 2009 12:36:34 GMT

Transition Point System Redundant Power Supply Option for 13-Slot Chassis, 120/240 VAC....

Point System 18Slot Chassis

Wed, 15 Apr 2009 12:36:34 GMT

Transition Point System 18-Slot Chassis....

Point System 13Slot Chassis

Wed, 15 Apr 2009 12:36:34 GMT

Transition Point System 13-Slot Chassis....

Point System 8Slot Chassis

Wed, 15 Apr 2009 12:36:34 GMT

Transition Point System 8-Slot Chassis....

Point System 2Slot Chassis

Wed, 15 Apr 2009 12:36:34 GMT

Transition Point System Dual Slot Chassis....

Point System 1Slot Chassis

Wed, 15 Apr 2009 12:36:34 GMT

Transition Point System Single Slot Chassis w/Internal Power Supply....

Point System 1Slot Chassis

Wed, 15 Apr 2009 12:36:34 GMT

Transition Point System Single Slot Chassis w/External Power Supply....

Point Sys 1000BT1000BLX SM SC

Wed, 15 Apr 2009 12:36:34 GMT

Transition 10/100/1000 Ethernet Point System Slide-In-Module Media Converters with Built-in Fiber Tap 10/100/1000BASE-T (RJ-45) [100 m/328 ft.] 1000BASE-LX 1310nm single mode (SC) [10 km/6.2 miles] Plus (1) 1000BASE-LX Tap Port...

Point Sys 1000BT1000BSX MM SC

Wed, 15 Apr 2009 12:36:34 GMT

Transition 10/100/1000 Ethernet Point System Slide-In-Module Media Converters with Built-in Fiber Tap 10/100/1000BASE-T (RJ-45) [100 m/328 ft.] 1000BASE-SX 850nm multimode (SC) [62.5/125 m: 220 m/722 ft.; 50/125 m: 550 m/1804 ft.]...

Point Sys SFP SlotSFP Slot

Wed, 15 Apr 2009 12:36:34 GMT

Transition Point System Optical Line Converter, SFP slot (empty) to SFP slot (empty)...

Point Sys 100BTX100BFX SM SC

Wed, 15 Apr 2009 12:36:34 GMT

Transition Fast Ethernet Point System Slide-In-Module Media Converters. 100BASE-TX (RJ-45) [100 m/328 ft.] 100BASE-FX 1310nm single mode (SC) [20 km/12.4 miles]...

Point Sys 100BTX100BSX MM SC

Wed, 15 Apr 2009 12:36:34 GMT

Transition OAM / IP-Based 10/100 Bridging Point System Slide-In-Module Media Converters 10/100BASE-TX (RJ-45) [100 m/328 ft.] 100BASE-FX 1300nm multimode (SC) [2 km/1.2 miles]...

Point Sys 10BT10BFL SM SC

Wed, 15 Apr 2009 12:36:34 GMT

Transition Point System Slide-In-Module Media Converter, 10BASE-T (RJ-45) [100 m/328 ft.] to 10BASE-FL 1310nm single mode (SC) [20 km/12.4 miles]...

Media CNVTR 16SLOT AC PS

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- MIL-RCM16AUS VENDOR- MILAN TECHNOLOGY

FEATURES- 16 slot Chassis
16-slot Chassis with management module and single 100...

48V Redundant Power Supply

Wed, 15 Apr 2009 12:36:34 GMT

48V Redundant Power Supply for TFC-1600. white box w/ TRENDnet Logo...

10100 Mbps Fiber to Ethernet

Wed, 15 Apr 2009 12:36:34 GMT

10/100 Mbps Fiber to Ethernet Single Mode WDM Media Converter (SC) *** Includes both Endpoints *** - Are you looking for a cost-effective way to deploy or increase the capacity of a fiber cabling solution? The ET90110WDM allows you to use one single-mode fiber cable for two-way communication at distances up to 20 Km, reducing fiber cabling costs. Alternatively, you can effectively double the capacity of your existing fiber infrastructure without the need to install new cabling.Includes two endpoints required for a single installation....

USB to RS422485 Converter

Wed, 15 Apr 2009 12:36:34 GMT

Converts USB signal to RS422/485 compatible signal...

RS232 to 422485 Converter

Wed, 15 Apr 2009 12:36:34 GMT

Converts RS-232 signal to RS422/485 compatible signal...

RS232 to Bluetooth Converter

Wed, 15 Apr 2009 12:36:34 GMT

Easily allow RS232 device to communicate wirelessly at 100M...

Point Sys ATM-SONET MM SC

Wed, 15 Apr 2009 12:36:34 GMT

1310nm SM SC 20km Stand-alone media converter...

Point Sys 100BTX-100BFX SM SC

Wed, 15 Apr 2009 12:36:34 GMT

10/100 RJ-45 to 100Base-FX 1310nm SM SC 20km...

Point Sys 100BTX-100BFX MM ST

Wed, 15 Apr 2009 12:36:34 GMT

10/100 RJ-45 to 100Base-FX 1300nm MM ST 2km...

Point System RPS for 18/19 Slo

Wed, 15 Apr 2009 12:36:34 GMT

Redundant -48V; Can be used with the 19 or 18-slot Point System Chassis...

Point System 18-Slot Chassis

Wed, 15 Apr 2009 12:36:34 GMT

18-slot Point System Chassis with -48V power supply [Class B] (Class B only when using Class B compliant Slide-In-Modules)...

Point Sys 100BTX-100FX SM SC

Wed, 15 Apr 2009 12:36:34 GMT

Fast Ethernet Media Converter Card 100Base-TX to 100Base-FX 1310nm SM SC 40km...

Redundant Power for TFC-1600

Wed, 15 Apr 2009 12:36:34 GMT

Redundant Power Supply for TFC-1600...

Management Module for TFC-1600

Wed, 15 Apr 2009 12:36:34 GMT

1 x 10/100Mbps Fast Ethernet RJ45 port and 1 x RS-232 Console ports for management Web Browser Based Management via Ethernet port or Command Line Interface Management via RS-232 port SNMP Agent Provides media Link/Connection Speed/Duplex status for each module Provides Cooling Fans and Power Supplies status...

16 Slots Chassis System Conver

Wed, 15 Apr 2009 12:36:34 GMT

TRENDnet's TFC-1600 16-slot EIA-19" Rack-Mount Chassis System provides housing for up to 16 TFC series media converters....

Point Sys 100BTX-100BFX SM SC

Wed, 15 Apr 2009 12:36:34 GMT

This Fast Ethernet media converter solution provides a fully-managed conversion between 100BASE-TX and 100BASE-FX signals at the Central Office (CO) and Customer Premises. With the Remotely Managed Fast Ethernet Media Converter, service providers can now monitor and manage the entire optical link from the CO to the Customer Premise Equipment (CPE). They also have the ability to remotely change the bandwidth offered to the customer in increments of 64 KBps and choose the appropriate mode of connection straight from their Network Management Centers....

Point Sys 1000BT-1000SX MM SC

Wed, 15 Apr 2009 12:36:34 GMT

1000B-T-1000B-SX 850nm MMSC 220m...

Point System Management Module

Wed, 15 Apr 2009 12:36:34 GMT

Single Slot Master Management Module...

Point Sys 10BT-10BFL MM ST

Wed, 15 Apr 2009 12:36:34 GMT

Ethernet Point System Slide-In-Module Converter...

MC DS3-T3-E3 10B2 to 10BFL MM

Wed, 15 Apr 2009 12:36:34 GMT

Point System Slide-In-Module Media Converters The DS3-T3/E3 copper to fiber media converter will provide a solution for those users that desire to extend the point of presence of their DS3 or E3 connection or use it to connect remote locations via T3/E3....

Point System Management Module

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- CPSMM-200 VENDOR- TRANSITION NETWORKS

FEATURES- Dual Slot Base Management Module
The CPSMM-200 should be used when the user intends to manage
multiple stacked chassis (up to 8 chassis per stack) via a single
IP or if the application requires an FCC/CISPR Class B rating.
This device occupies two slots in a Point System chassis and will
also fully support all management features. The CPSMM-200 has a
DB-9 serial interface as well as a 10BASE-T interface similar to
the CPSMM-120. However, it also includes two (2) additional RJ-45
ports ("in" and "out") to accommodate stacking of multiple Point
System Chassis. The CPSMM-200 also differs from the CPSMM-120 in
that it is FCC/CISPR Class B rated (can be used in residential
applications.)...

Point Sys 100BTX-100BFX SM SC

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- CFETF1014-205 VENDOR- TRANSITION NETWORKS

FEATURES- 10/100 Bridging Point System Slide-In-Module Converter
Fast Ethernet 100BaseTX to 100BaseFX (SC) single mode.
For use in a Transition Point System Chassis.
With Transition Networks full-featured 100BASE-TX to 100BASE-FX
Media Converters, cost-effective integration of twisted pair and
fiber optics in Fast Ethernet networks is easier than ever before.
Deploy fiber in a strategic and economical manner by using Fast
Ethernet converters. Fast Ethernet converters can extend distances
that copper cannot reach. Converters can be used in conjunction
with lower cost copper based equipment to extend fiber to remote
users.
* Round trip delay of only 40 bit times--far below the Class II rating of
92 bit times.
* Auto-Negotiation (802.3u)
Allows devices to perform automatic configuration to achieve the best
possible mode of operation over a link.
* AutoCross
Automatically detects and configures the twisted pair port on the
converter to the correct MDI or MDI-X configuration.
* Link Pass Through
Link Pass Through is a troubleshooting feature that allows the media
converter to monitor both the fiber and copper RX ports for loss of
signal.
* Far End Fault (FEF)
A troubleshooting feature that is generally used in conjunction with
Link Pass Through to notify both end devices of a loss of link.
* Automatic Link Restoration
Transition Networks converters will automatically re-establish link in
all network conditions.
* Pause (IEEE 802.3xy)
Pause signaling is an IEEE feature that temporarily suspends data
transmission between two devices in the event that one of the devices
becomes overwhelmed.
* Remote Firmware Upgrade
* Point System Chassis
Can be used with an...

Point Sys 10BT-10BFL MM SC

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- CETTF1013-105 VENDOR- TRANSITION NETWORKS

FEATURES- 10 Bridging Point System Slide-In-Module Converter
10BaseT to 10Base-FL MM (SC), 2km.
For use in a Transition Point System Chassis.
Media converters transparently connect one type of media, or
cabling, to another.
* Extend Network Distance
Two 10BASE-T to 10BASE-FL Media Converters used back-to-back extend the
distance between two 10BASE-T devices up to 2 km using multimode fiber
without a repeater.
* Connect Unlike Devices
Connect your workgroup to a distant server or a central switch; or
extend distances between like and unlike devices in either full or half-
duplex modes.
* Point System Chassis
Can be used with any Point System Chassis.
* AutoCross
Automatically detects and configures the twisted pair port on the
converter to the correct MDI or MDI-X configuration.
* Link Pass Through
Link Pass Through is a troubleshooting feature that allows the media
converter to monitor both the fiber and copper RX ports for loss of
signal.

-- SPECIFICATIONs ----------------------------------
CONNECTORS - (1) 10BaseT (RJ-45) [100 m/328 ft.]
(1) 10BaseFL 850nm multimode (SC) [2 km/1.2 miles]
STANDARDS - IEEE Std. 802.3, 10BaseT, 10BaseFL
FIBER OPTIC CONNECTOR-
Multimode Min TX PWR : -19 dBm
Max TX PWR : -14 dBm
RX Sensitivity: -32.5 dBm
Max In PWR : -14 dBm
Link Budget : 13.50 dB
APPROVALS - EN55022; EN55024; EN61000; CE Mark; FCC A
POWER - Consumption: 2.3 watts
DIMENSIONS - 0.85"w x 3.4"h x 5.0"d...

Point System RPS for 18/19 Sl

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- CPSMP-200 VENDOR- TRANSITION NETWORKS

FEATURES- Redundant Power Supply Module
Redundant 120/240 VAC; Can be used with the 19 or 18-slot Point
System Chassis....

Point System 19-Slot Chassis

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- CPSMC1900-100 VENDOR- TRANSITION NETWORKS

FEATURES- 19-Slot Point System Chassis
19-slot Point System Chassis with -48V power supply!
The Point System is a cost effective, fully configurable, managed
modular media conversion platform, that provides users with the
flexibility to build their own custom media conversion system. The
system includes rack mountable chassis and modular, hot-swappable
slide-in cards. Each Point System Slide-in Module media converter,
regardless of protocol, can be slid into the same chassis and
provide managed media conversion services to suit a custom network
application.
* Comprehensive media conversion platform
* Enhanced SNMP management software Focal Point
* High port density: supports up to 19 Point System Slide-In-Module Media
Converters in a single chassis.
* Standard 19" 2 U rack unit height
* Power enable/disable per slot
* Optional LED module
* Point System Products
* Focal Point Management Software
* Point System Slide-In-Module Media Converters
* Point System Power Supply Modules

-- SPECIFICATIONs ----------------------------------
CONNECTORS - (19) Slots in front for slide-in-modules
( 2) Slots in back for power supply modules
INDICATORS - LEDs for Power, Link, Receive, Transmit
ALSO AVAILABLE - CPSMM120 Single Slot Master Management Module
CPSMM200 Dual Slot Master Management Module Used in base
chassis when stacking multiple Point System
Chassis.
CPSMM210 Single Slot Expansion Management Module Used in
expansion chassis when stacking multiple
Point System Chassis.
CPSMP200 Redundant power supply 120/240 VA...

Point Sys 100BTX-100BFX SC

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- CFETF1013-105 VENDOR- TRANSITION NETWORKS

FEATURES- 10/100 Bridging Point System Slide-In-Module Converter
Fast Ethernet 100BaseTX to 100BaseFX.
For use in a Transition Point System Chassis.
With Transition Networks full-featured 100BASE-TX to 100BASE-FX
Media Converters, cost-effective integration of twisted pair and
fiber optics in Fast Ethernet networks is easier than ever before.
Deploy fiber in a strategic and economical manner by using Fast
Ethernet converters. Fast Ethernet converters can extend distances
that copper cannot reach. Converters can be used in conjunction
with lower cost copper based equipment to extend fiber to remote
users.
* Round trip delay of only 40 bit times--far below the Class II rating of
92 bit times.
* AutoCross
Automatically detects and configures the twisted pair port on the
converter to the correct MDI or MDI-X configuration.
* Auto-Negotiation (802.3u)
Allows devices to perform automatic configuration to achieve the best
possible mode of operation over a link.
* Link Pass Through
Link Pass Through is a troubleshooting feature that allows the media
converter to monitor both the fiber and copper RX ports for loss of
signal.

-- SPECIFICATIONs ----------------------------------
CONNECTORS - (1) 100BaseTX (RJ-45) [100 m/328 ft.]
(1) 100BaseFX 1300nm multimode (SC) [2 km/1.2 miles]
STANDARDS - IEEE 802.3
FIBER OPTIC CONNECTOR-
Multimode Min TX PWR : -19 dBm
Max TX PWR : -14 dBm
RX Sensitivity: -31 dBm
Max In PWR : -14 dBm
Link Budget : 12.0 dB
INDICATORS - LEDs for Power, TX, FX
APPROVALS - UL Listed, C-UL Listed (Canada), CE Mark, FCC ...

Point Sys 100BTX-100BFX MM ST

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- CFETF1011-105 VENDOR- TRANSITION NETWORKS

FEATURES- 10/100 Bridging Point System Slide-In-Module Converter
Fast Ethernet 100BaseTX to 100BaseFX (ST) multimode.
For use in a Transition Point System Chassis.
With Transition Networks full-featured 100BASE-TX to 100BASE-FX
Media Converters, cost-effective integration of twisted pair and
fiber optics in Fast Ethernet networks is easier than ever before.
Deploy fiber in a strategic and economical manner by using Fast
Ethernet converters. Fast Ethernet converters can extend distances
that copper cannot reach. Converters can be used in conjunction
with lower cost copper based equipment to extend fiber to remote
users.
* Round trip delay of only 40 bit times--far below the Class II rating of
92 bit times.
* AutoCross
Automatically detects and configures the twisted pair port on the
converter to the correct MDI or MDI-X configuration.
* Auto-Negotiation (802.3u)
Allows devices to perform automatic configuration to achieve the best
possible mode of operation over a link.
* Link Pass Through
Link Pass Through is a troubleshooting feature that allows the media
converter to monitor both the fiber and copper RX ports for loss of
signal.

-- SPECIFICATIONs ----------------------------------
CONNECTORS - (1) 100BaseTX (RJ-45) [100 m/328 ft.]
(1) 100BaseFX 1300nm multimode (ST) [2 km/1.2 miles]
STANDARDS - IEEE 802.3
FIBER OPTIC CONNECTOR-
Multimode Min TX PWR : -19 dBm
Max TX PWR : -14 dBm
RX Sensitivity: -31 dBm
Max In PWR : -14 dBm
Link Budget : 12.0 dB
INDICATORS - LEDs for Power, TX, FX
APPROVALS - UL Listed, C-UL Listed (Canada)...

MCS-MOD 1000TX-1000SX SC MMF

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- MIL-RC6413SXUS VENDOR- MILAN TECHNOLOGY

FEATURES- Raven Series Media Converter Module
100/1000BaseTX to 1000BaseSX SC MMF.
The Raven Series of Converters offers connectivity solutions for a
broad range of environments. Whether connecting two remote
locations, or solving a difficult wiring closet issue, the Raven
Series has a product to meet your needs. The standalone converters
are ideal for remote locations requiring a single, cost effective
fiber link. These converters may be consolidated into a 19 inch
rack system, allowing for utilization of a common product in the
main or intermediate distribution frame and at the remote location.
For those needing visibility into how their network is operating, a
managed media conversion system is available.
* The Raven Series is designed with ease of use in mind. The UTP port will
auto-detect the cabling type (cross over or straight through), the
polarity of the pins, the speed of the port and the mode of the port
without any user intervention. No more concerns about what type of device
the converter is connecting, whether hub or server. The broad range of
media for the fiber port makes for optimal flexibility in designing the
network, and upgrading the network in the future.
* This product has been designed with diagnostic functions as well. The
LinkSentry feature allows for passing through physical layer failures
from one media to the other. This allows for a higher reliability in your
network by making all components aware of network failures as they occur.
The managed system takes this further by sending traps when link failures
are seen on the ports.
* The ease of use, flexibility in network design, Advanced diagnostic
capabilities and management features make the Raven series of converters

Media CNVTR 10-SLOT RACK

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- MIL-RCS10AUS VENDOR- MILAN TECHNOLOGY

FEATURES- 10 slot chassis for standalone Raven Converters (Unmanaged)
Includes AC power supply.
SIZE - 17.32"w x 5.24"h x 10.47"d WT.- 6.75 lbs.
...

MCS-MOD 1000TX-1000LX SC SMF

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- MIL-RC6413LX VENDOR- MILAN TECHNOLOGY

FEATURES- Raven Series Media Converter Module
100/1000BaseTX to 1000BaseLX SC SMF.
The Raven Series of Converters offers connectivity solutions for a
broad range of environments. Whether connecting two remote
locations, or solving a difficult wiring closet issue, the Raven
Series has a product to meet your needs. The standalone converters
are ideal for remote locations requiring a single, cost effective
fiber link. These converters may be consolidated into a 19 inch
rack system, allowing for utilization of a common product in the
main or intermediate distribution frame and at the remote location.
For those needing visibility into how their network is operating, a
managed media conversion system is available.
* The Raven Series is designed with ease of use in mind. The UTP port will
auto-detect the cabling type (cross over or straight through), the
polarity of the pins, the speed of the port and the mode of the port
without any user intervention. No more concerns about what type of device
the converter is connecting, whether hub or server. The broad range of
media for the fiber port makes for optimal flexibility in designing the
network, and upgrading the network in the future.
* This product has been designed with diagnostic functions as well. The
LinkSentry feature allows for passing through physical layer failures
from one media to the other. This allows for a higher reliability in your
network by making all components aware of network failures as they occur.
The managed system takes this further by sending traps when link failures
are seen on the ports.
* The ease of use, flexibility in network design, Advanced diagnostic
capabilities and management features make the Raven series of converters

MCS-MOD 100BTX-100FX SC SMF

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- MIL-RC34W13 VENDOR- MILAN TECHNOLOGY

FEATURES- Raven Series Media Converter Module
10/100BaseTX to 100BaseFX SC SMF TX 1310nm WDM.
The Raven Series of Converters offers connectivity solutions for a
broad range of environments. Whether connecting two remote
locations, or solving a difficult wiring closet issue, the Raven
Series has a product to meet your needs. The standalone converters
are ideal for remote locations requiring a single, cost effective
fiber link. These converters may be consolidated into a 19 inch
rack system, allowing for utilization of a common product in the
main or intermediate distribution frame and at the remote location.
For those needing visibility into how their network is operating, a
managed media conversion system is available.
* The Raven Series is designed with ease of use in mind. The UTP port will
auto-detect the cabling type (cross over or straight through), the
polarity of the pins, the speed of the port and the mode of the port
without any user intervention. No more concerns about what type of device
the converter is connecting, whether hub or server. The broad range of
media for the fiber port makes for optimal flexibility in designing the
network, and upgrading the network in the future.
* This product has been designed with diagnostic functions as well. The
LinkSentry feature allows for passing through physical layer failures
from one media to the other. This allows for a higher reliability in your
network by making all components aware of network failures as they occur.
The managed system takes this further by sending traps when link failures
are seen on the ports.
* The ease of use, flexibility in network design, Advanced diagnostic
capabilities and management features make the Raven series of co...

MCS-MOD 100BTX-100FX SC SMF

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- MIL-RC34W15 VENDOR- MILAN TECHNOLOGY

FEATURES- Raven Series Media Converter Module
10/100BaseTX to 100BaseFX SC SMF TX 1550nm WDM.
The Raven Series of Converters offers connectivity solutions for a
broad range of environments. Whether connecting two remote
locations, or solving a difficult wiring closet issue, the Raven
Series has a product to meet your needs. The standalone converters
are ideal for remote locations requiring a single, cost effective
fiber link. These converters may be consolidated into a 19 inch
rack system, allowing for utilization of a common product in the
main or intermediate distribution frame and at the remote location.
For those needing visibility into how their network is operating, a
managed media conversion system is available.
* The Raven Series is designed with ease of use in mind. The UTP port will
auto-detect the cabling type (cross over or straight through), the
polarity of the pins, the speed of the port and the mode of the port
without any user intervention. No more concerns about what type of device
the converter is connecting, whether hub or server. The broad range of
media for the fiber port makes for optimal flexibility in designing the
network, and upgrading the network in the future.
* This product has been designed with diagnostic functions as well. The
LinkSentry feature allows for passing through physical layer failures
from one media to the other. This allows for a higher reliability in your
network by making all components aware of network failures as they occur.
The managed system takes this further by sending traps when link failures
are seen on the ports.
* The ease of use, flexibility in network design, Advanced diagnostic
capabilities and management features make the Raven series of co...

MCS-MOD 100BTX-100FX SC SMF

Wed, 15 Apr 2009 12:36:34 GMT

MiLAN 10/100BaseTX to 100BaseFX SC Single Mode Fiber (60km) Media Conversion System (MCS) Module....

MCS-MOD 100BTX-100FX SC SMF

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- MIL-RC3413-30 VENDOR- MILAN TECHNOLOGY

FEATURES- Raven Series Media Converter Module
10/100BaseTX to 100BaseFX SC SMF 30km.
The Raven Series of Converters offers connectivity solutions for a
broad range of environments. Whether connecting two remote
locations, or solving a difficult wiring closet issue, the Raven
Series has a product to meet your needs. The standalone converters
are ideal for remote locations requiring a single, cost effective
fiber link. These converters may be consolidated into a 19 inch
rack system, allowing for utilization of a common product in the
main or intermediate distribution frame and at the remote location.
For those needing visibility into how their network is operating, a
managed media conversion system is available.
* The Raven Series is designed with ease of use in mind. The UTP port will
auto-detect the cabling type (cross over or straight through), the
polarity of the pins, the speed of the port and the mode of the port
without any user intervention. No more concerns about what type of device
the converter is connecting, whether hub or server. The broad range of
media for the fiber port makes for optimal flexibility in designing the
network, and upgrading the network in the future.
* This product has been designed with diagnostic functions as well. The
LinkSentry feature allows for passing through physical layer failures
from one media to the other. This allows for a higher reliability in your
network by making all components aware of network failures as they occur.
The managed system takes this further by sending traps when link failures
are seen on the ports.
* The ease of use, flexibility in network design, Advanced diagnostic
capabilities and management features make the Raven series of converters ...

MCS-MOD 100BTX-100FX SC SMF

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- MIL-RC3413-15 VENDOR- MILAN TECHNOLOGY

FEATURES- Raven Series Media Converter Module
10/100BaseTX to 100BaseFX SC SMF 15km.
The Raven Series of Converters offers connectivity solutions for a
broad range of environments. Whether connecting two remote
locations, or solving a difficult wiring closet issue, the Raven
Series has a product to meet your needs. The standalone converters
are ideal for remote locations requiring a single, cost effective
fiber link. These converters may be consolidated into a 19 inch
rack system, allowing for utilization of a common product in the
main or intermediate distribution frame and at the remote location.
For those needing visibility into how their network is operating, a
managed media conversion system is available.
* The Raven Series is designed with ease of use in mind. The UTP port will
auto-detect the cabling type (cross over or straight through), the
polarity of the pins, the speed of the port and the mode of the port
without any user intervention. No more concerns about what type of device
the converter is connecting, whether hub or server. The broad range of
media for the fiber port makes for optimal flexibility in designing the
network, and upgrading the network in the future.
* This product has been designed with diagnostic functions as well. The
LinkSentry feature allows for passing through physical layer failures
from one media to the other. This allows for a higher reliability in your
network by making all components aware of network failures as they occur.
The managed system takes this further by sending traps when link failures
are seen on the ports.
* The ease of use, flexibility in network design, Advanced diagnostic
capabilities and management features make the Raven series of converte...

MCS-MOD 100BTX-100FX SC MMF

Wed, 15 Apr 2009 12:36:34 GMT

MODEL- MIL-RC3413 VENDOR- MILAN TECHNOLOGY

FEATURES- Raven Series Media Converter Module
10/100BaseTX to 100BaseFX SC MMF 2km.
The Raven Series of Converters offers connectivity solutions for a
broad range of environments. Whether connecting two remote
locations, or solving a difficult wiring closet issue, the Raven
Series has a product to meet your needs. The standalone converters
are ideal for remote locations requiring a single, cost effective
fiber link. These converters may be consolidated into a 19 inch
rack system, allowing for utilization of a common product in the
main or intermediate distribution frame and at the remote location.
For those needing visibility into how their network is operating, a
managed media conversion system is available.
* The Raven Series is designed with ease of use in mind. The UTP port will
auto-detect the cabling type (cross over or straight through), the
polarity of the pins, the speed of the port and the mode of the port
without any user intervention. No more concerns about what type of device
the converter is connecting, whether hub or server. The broad range of
media for the fiber port makes for optimal flexibility in designing the
network, and upgrading the network in the future.
* This product has been designed with diagnostic functions as well. The
LinkSentry feature allows for passing through physical layer failures
from one media to the other. This allows for a higher reliability in your
network by making all components aware of network failures as they occur.
The managed system takes this further by sending traps when link failures
are seen on the ports.
* The ease of use, flexibility in network design, Advanced diagnostic
capabilities and management features make the Raven series of converter...