Consumer Audio Accessories

Universal iPod Dock

Wed, 15 Apr 2009 12:34:22 GMT

With the YDS11 and a compatible Yamaha receiver, connecting your iPod to the best sound system in the house is truly as easy as 1-2-3. YDS11 Universal Dock works with: iPod nano, iPod mini and iPod (Click Wheel)?Newly released (2007-09) iPod classic, iPod nano and iPod touch are compatible for music content playback and control only....

Tabletop IR Receiver

Wed, 15 Apr 2009 12:34:22 GMT

MODEL- 854 VENDOR- RUSSOUND

FEATURES- SaphIR Table Top IR Receiver
This receiver is CFL-friendly and has a front panel mounted blue
talkback indicator.
84" cable with 1/8" stereo mini plug, 12 VDC.

SIZE - 2.28"w x 0.72"h x 1.68"d
...

Dock w/Univ Remote for iPOD

Wed, 15 Apr 2009 12:34:22 GMT

Dock w/Univ Remote for iPOD...

RS232 Extender

Wed, 15 Apr 2009 12:34:22 GMT

The ex-tend-it RS-232 Extender extends your RS-232 device up to 1000 feet away from your computer. The RS-232 Extender sender unit sits next to your computer. The RS-232 sender is powered by a 5-volt power supply, which also powers the receiver side. The RS-232 cables connect to the source to the RS-232 sender. At the extended location, the RS-232 device is connected to the RS-232 Extender receive unit. CAT-5 cables connect the send and receive units - up to 1000 feet away....

Analog Audio Extender

Wed, 15 Apr 2009 12:34:22 GMT

Extends any S/PDIF and TOSlink digital audio device up to 330 feet from the source. Supports Digital 7.1. Supplies clear digital audio over long distances as if connected locally. Streamlines audio installations by allowing source devices to be located in off-site or unseen rack....

Analog Audio Extender

Wed, 15 Apr 2009 12:34:22 GMT

The Audio Extender sender unit sits next to your audio source. Stereo cables supplied with the Audio Extender package connect your audio source to the sender. The receiver unit connects to your speakers or audio output device. One CAT-5 cable connects the sender and the receiver to each other - up to 1000 feet away....

Moving Coil Cartridge

Wed, 15 Apr 2009 12:34:22 GMT

Moving Oil Cartridge* Coil made of copper(6N) and solid gold* Output Voltage 0.15mV* Frequency response: 30Hz-70kHz* Output Impedance: 40ohms* Tracking Tip: Special elliptical tip* Tracking Force: 1.3g +- 0.2g* Compliance: 14x10-6 cm/dyne....

Moving Coil Cartridge

Wed, 15 Apr 2009 12:34:22 GMT

Moving Oil Cartridge* Output Voltage: 0.18mV* Frequency response: 20Hz-70kHz* Output Impedance: 40ohms* Tracking Tip: 0.07x0.1mm special elliptical tip* Tracking Force: 1.2g +- 0.1g* Compliance: 14x10-6 cm/dyne...

Moving Coil Cartridge

Wed, 15 Apr 2009 12:34:22 GMT

Moving Oil Cartridge* Output Voltage 0.4mV* Frequency response: 20Hz-60kHz* Output Impedance: 33ohms* Tracking Tip: Special elliptical tip* Tracking force: 1.4g +- 0.2g* Compliance: 12x10-6 cm/dyne....

High Output Moving Coil Cartr

Wed, 15 Apr 2009 12:34:22 GMT

High Output Moving Coil Cartridge* Output Voltage: 1.6mV* Frequency response: 20Hz-50kHz* Output Impedance: 160ohms* Tracking Tip: 0.07x0.1mm special elliptical solid diamond tip* Tracking Force: 1.6g +- 0.2g* Compliance: 14x10-6 cm/dyne....

High Output Moving Coil

Wed, 15 Apr 2009 12:34:22 GMT

High Output Moving Coil Cartridge* Output Voltage: 1.6mV* Frequency response: 20Hz-45kHz* Output Impedance: 160ohms* Tracking Tip: 0.1x0.2 mm special elliptical solid diamond tip* Tracking Force: 1.8g +- 0.2g* Compliance: 8x10-6 cm/dyne....

Moving Coil Cartridge

Wed, 15 Apr 2009 12:34:22 GMT

Moving Coil Cartridge* Same as DL103R except has Glass fiber composite housing* Real Walnut wood case....

Moving Coil Cartridge

Wed, 15 Apr 2009 12:34:22 GMT

Moving Coil Cartridge* Coil made of copper(6N)* Output Voltage 0.25mV* Frequency response: 20Hz-45kHz* Output Impedance: 14ohms* Tracking Tip: 16.5micron round trip* Tracking force: 2.5g+-0.2g* Compliance: 5x10-6 cm/dyne*....

Moving Coil Cartridge

Wed, 15 Apr 2009 12:34:22 GMT

Moving Coil Cartridge for monaural record* Connectivity to Moving Magnet cartridge terminal* Output Voltage: 3mV* Frequence response: 50Hz-10kHz* Output Impedance: 240ohms* Tracking Tip: 17.0micron round trip* Tracking Force: 3.0g +- 1.0g....

6-WAY SPEAKER SELECTOR

Wed, 15 Apr 2009 12:34:22 GMT

6-WAY SPEAKER SELECTOR....

4.1 HDMI Switcher w/Repeater

Wed, 15 Apr 2009 12:34:22 GMT

4.1 HDMI SWITCHER W REPEATER...

2.1 HDMI SWITCHER W REPEATER

Wed, 15 Apr 2009 12:34:22 GMT

2.1 HDMI SWITCHER W REPEATER...

8 WAY SPEAKER SELECTOR

Wed, 15 Apr 2009 12:34:22 GMT

8 WAY SPEAKER SELECTOR....

6 WAY SPEAKER SELECTOR

Wed, 15 Apr 2009 12:34:22 GMT

6 WAY SPEAKER SELECTOR....

Basic IR Kit Almond

Wed, 15 Apr 2009 12:34:22 GMT

Includes 1 858 Receiver Almond, 2 1584.1 dual micro emitter, 10 ft cable, 1 857 IR connecting block, 1 846c power supply....

RXN600BL Dock for iPod

Wed, 15 Apr 2009 12:34:22 GMT

MODEL- YDS-10 VENDOR- YAMAHA CORP.

FEATURES- iPod Dock for select Yamaha AV Receivers
Connecting your iPod to your home theater receiver has never been
easier, or sounded so good!
The YDS-10 Universal Dock lets you connect your iPod to this
receiver. You can listen to your iPod music and watch iPod images
and movies on your monitor via the receiver. You can also operate
your iPod via the receiver s remote unit with the On-Screen Display
and charge your iPod. Works with: iPod nano, iPod mini and iPod
(Click and Wheel).
* Using the YDS-10, you can:
- Enjoy iPod audio, images and video
- Use the On-Screen Display to operate the iPod
- Operate the iPod via the receiver's remote control
- Charge the iPod
* YDS-10 Advantage
- Easy connection by one cable
- No need additional adaptor
- Looking good and matching for either white and black iPod
* Compatible Yamaha Digital Home Theatre Products
RX-N600, RX-V559, RX-V659, HTR-5950, HTR-5960 and YHT-670

MANUFACTURER WARRANTY: 90 DAYS...

Terk Indoor Outdoor Antenna

Wed, 15 Apr 2009 12:34:22 GMT

MODEL- TV55 VENDOR- AUDIOVOX ELECTRONICS

FEATURES- Terk Indoor Outdoor Antenna
Multi mount antenna ideal for receiving off-air HD signals from
condos or apartments.
CEA color code: Light Green
Compact design with the performance of a larger antenna
Dual-mode amplifier allows a choice of best gain setting for
optimum reception.
Amplifier is impedance matched for best HDTV performance
Ultra-durable, weatherproof housing...

Terk Ind low Profile TV antenn

Wed, 15 Apr 2009 12:34:22 GMT

MODEL- TV5 VENDOR- AUDIOVOX ELECTRONICS

FEATURES- Terk Indoor amplified TV antenna
For clear reception from an indoor set-top antenna, try Terks TV5.
Its compact design uses twin-tuned horizontal receiving elements
that are less than 5 inches high -- nice and low for sitting on
top of your TV or cabinet. These horizontal elements not only look
better than "rabbit ears," they also work better because they
require less adjustment -- they Are always in matched position.
Directional tuning for individual stations is simple: a slight
rotation of the elements is all it takes.
* Compact matched-pair receiving elements
* Built-in variable-gain amplifier (to +40 dB for UHF/VHF).
* VHF and UHF capability for reception of channels 2-69
* RF-style video input with antenna/source switch
* VHF/UHF band separator with 75-300 ohm matching transformer
* AC adapter
* 25"W x 4-3/4"H x 12"D
* Not for FM radio reception; built-in filter removes FM signals.
...

Terk Ind amplified AM-FM ant

Wed, 15 Apr 2009 12:34:22 GMT

Terk Indoor amplified AM/FM antenna - Black...

Terk Indoor Amplified AM-FM An

Wed, 15 Apr 2009 12:34:22 GMT

MODEL- TOWER VENDOR- AUDIOVOX ELECTRONICS

FEATURES- Terk Amplified Indoor AM/FM Antenna
The Terk Tower antenna is the affordable and easy way to improve
both short and long-range radio reception. The Tower serves as two
antennas in one. Mounted vertically, it becomes an omnidirectional
antenna for great reception from all directions. Place it flat,
and the Tower becomes a directional antenna that can be positioned
to zero in on weak or distant stations.
Performance of the Tower is enhanced by its unique AirCoil
technology that electrically isolates the AM and FM elements from
each other for increased selectivity with dramatically reduced
static and noise.
* Universal slip-on connector and matching adapters
* 3-1/4"W x 16-15/16"H x 3-1/2"D

MANUFACTURER WARRANTY: 90 DAYS...

Terk FM-50 (FM Pro)

Wed, 15 Apr 2009 12:34:22 GMT

MODEL- FM-50 VENDOR- AUDIOVOX ELECTRONICS

FEATURES- Terk Indoor/outdoor amplified long-range FM antenna
The FM Pro is Terks most ambitious FM-only antenna yet. It is a
long-range amplified antenna designed for demanding FM listeners.
Mounted indoors or outdoors in an unobstructed location, the FM Pro
combines remarkable reception and installation ease.
The FM Pro can be mounted indoors or outdoors, on a rooftop or the
side of your house, upstairs in the attic, or on the wall above
your audio components -- it is as versatile as it is powerful. (The
sleek, weatherproof housing is even paintable.)
The amplifier is housed inside the antenna and is powered via an
included power injector that sends voltage directly through the
coaxial cable and into the antennas amplifier.
For optimum performance, the FM Pro should be mounted horizontally
with the front facing the general direction of the broadcast
signal.
Includes FM-Pro antenna, 75-75 ohm 75-300 ohm coax to spring clip
adapters, 3 mounting screws, AC adapter with attached 6 foot cable
terminating in coax out (to receiver) and coax in (from antenna)
(12vDC/100mA), Instruction sheet.
* Amplifier provides +11 dB gain (remotely switchable)
* Antenna attaches with 3 mounting screws (included)
* 75-ohm to 75-ohm & 75-ohm to 300-ohm coax to spring clip adapters
* AC adapter
* 58-5/16"W x 4-1/2"H x 1-7/16"D

MANUFACTURER WARRANTY: 90 DAYS...

Terk Indoor Amplified FM AnT

Wed, 15 Apr 2009 12:34:22 GMT

MODEL- EDGE VENDOR- AUDIOVOX ELECTRONICS

FEATURES- Edge Dual-Drive Amplified FM Antenna by Terk
The FM Edge utilizes Terks Dual Drive Amplifier circuitry, which
minimizes noise in the FM signal with a 2-stage filter/amplifier.
The amplification range is 0 to +36 dB, adjustable with a handy
thumb wheel.
Reception sensitivity is enhanced with the newly developed Advanced
Capture Circuitry, which helps lock onto signals in crowded areas,
and also to improve reception for lower-powered signals.
The FM Edges sleek good looks make it a stylish alternative to the
clunky T-wire dipole antennas included with most receivers.
* Power-on/amplifier strength LED
* Thumb wheel amplifier adjustment
* 75-ohm "F"-type to 75-ohm bare wire adapter
* 75-ohm to 300-ohm adapter
* AC adapter
* 2-15/16"W x 7-9/16"H x 3-3/4"D

MANUFACTURER WARRANTY: 90 DAYS...